| Issue |
BIO Web Conf.
Volume 145, 2024
International Scientific Forestry Forum 2024: Forest Ecosystems as Global Resource of the Biosphere: Calls, Threats, Solutions (Forestry Forum 2024)
|
|
|---|---|---|
| Article Number | 03018 | |
| Number of page(s) | 7 | |
| Section | Timber Industry and Mechanization of the Forestry Complex | |
| DOI | https://doi.org/10.1051/bioconf/202414503018 | |
| Published online | 28 November 2024 | |
Development of technology and design platforms at topological norms less than 90 nm
1 Voronezh State Forest Engineering University, 394087 Voronezh, Russia
2 Moscow Aviation Institute (National Research University), 125993, Moscow, Russia
3 Moscow State University of Civil Engineering, 129337 Moscow, Russia
* Corresponding author: dar@mai.ru
The article discusses Moore’s law, which has had a significant impact on the development of microelectronics, allowing us to evaluate parameters such as the performance of microprocessors and the clock frequency of digital circuits. However, the transition to technological standards of less than 100 nm has led to new problems in the production and design of chips. The article also discusses changes in integrated circuit design tools, ranging from manual creation of topological layers to modern automated systems capable of solving complex problems of logical modeling and analysis of chip parameters. The issues of the development of design technology at topological standards of 90nm are considered.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.