Open Access
Issue
BIO Web Conf.
Volume 84, 2024
International Scientific and Practical Conference “Development and Modern Problems of Aquaculture” (AQUACULTURE 2023)
Article Number 05045
Number of page(s) 14
Section Environmental Protection Engineering
DOI https://doi.org/10.1051/bioconf/20248405045
Published online 05 January 2024
  • V.V. Ayupov, Mathematical modeling of technical systems: textbook, Federal state budgetary education. institution of higher education “Perm State Agricultural Academy named after D.N. Pryanishnikov”, 242 (Perm, CPI “Prokrost”, 2017) [Google Scholar]
  • B. Li, Coordinated control of gear shifting process with multiple clutches for power-shift transmission, Mech. Mach. Theory, 140, 274-291 (2019) [CrossRef] [Google Scholar]
  • N.K. Kuznetsov, Reducing of dynamic loads of excavator actuators, Journal of Physics: Conference Series, IOP Publishing, 1, 012075 (2019) https://doi.org/10.1088/1742-6596/1210/1/012075 [CrossRef] [Google Scholar]
  • Z.A. Gojaev, V. I. Pryadkin, A.V. Artemov, P. A. Kolyadin, Evaluation of the influence of tire parameters on the controllability of the car, Automotive industry, 2, 14-19 (2023) [Google Scholar]
  • Z. A. Gojaev, The use of adaptive running systems for springing MES to reduce vibration activity from the support surface, Fundamental and applied problems of engineering and technology, 6(356), 138-142 (2022) doi: 10.33979/2073-7408-2022-356-6-138-142. – EDN JRCJAZ. [Google Scholar]
  • V.N. Loy, A.O. Germanovich, Evaluation of the vibration load of the workplace of the operator of a mobile chopping machine, Proceedings of BSTU. No. 2. Forestry and woodworking industry, 2(175), 3-7 (2015) [Google Scholar]
  • I. Melikov, V. Kravchenko, S. Senkevich, E. Hasanova, L. Kravchenko, Traction and energy efficiency tests of oligomeric tires for category 3 tractors, IOP Conference Series: Earth and Environmental Science, 403, 012126 (2019) doi: http://doi.org/10.1088/1755-1315/403/1/012126 [CrossRef] [Google Scholar]
  • V. Dygalo, M. Lyashenko, V. Shekhovtsov, Formation of basic performance properties of wheeled vehicles in braking mode, Transportation Research Procedure : 14, Saint Petersburg, October 21-24, 2020, Saint Petersburg, 130-135 (2020) doi 10.1016/j.trpro.2020.10.016. [Google Scholar]
  • V. V. Shekhovtsov, N. S. Sokolov-Dobrev, M. V. Lyashenko, Technology of creation of three-dimensional model of tractor transmission in program package “universal mechanism”, Lecture Notes in Mechanical Engineering, 9783319956299, 2017-2025 (2019) doi 10.1007/978-3-319-95630-5_217. [Google Scholar]
  • V. Shekhovtsov, M. Lyashenko, P. Potapov, et al., Calculated and experimental tests of dynamic vibration isolators for use in the suspension system of the traction vehicle cabin, IOP Conference Series: Materials Science and Engineering : Design Technologies for Wheeled and Tracked Vehicles, MMBC 2019, Moscow, 01-02 October Moscow: Institute of Physics Publishing, 012022 (2020) doi: 10.1088/1757-899X/820/1/012022. [Google Scholar]
  • D. Ilyushin, Ye. A. Salykin, V. Shekhovtsov. et al., Special aspects of the test of ATV equipped with the electronic engine management system Continental M3C on a dynamometer test bench, IOP Conference Series: Materials Science and Engineering : Design Technologies for Wheeled and Tracked Vehicles, MMBC 2019, Moscow, 01-02 October 2019. – Moscow: Institute of Physics Publishing, 012011 (2020) doi 10.1088/1757-899X/820/1/012011. [Google Scholar]
  • Z. A. Gojaev, E. V. Ovchinnikov, A. S. Ovcharenko, Development and creation of running systems of agricultural tractors with a replaceable half-track, Agrarian science of Euro-North-East, 24(3), 498-509 (2023) doi: 10.30766/2072-9081.2023.24.3.498-509 [Google Scholar]
  • Z. A. Gojaev, S. E. Senkevich, V. A. Kuzmin, Vibration protection of the hydraulic system of springing mobile machines with the use of active regulation by a neural network controller, Tractors and agricultural machines, 4, 43-49 (2019) doi 10.31992/0321-4443-2019-4-43-49 [Google Scholar]
  • O. Prentkovsky, R. Pechelyunas, Vehicle dynamics at the moment of emergency braking, Proceedings of International Conference RelStat’04. Part 3. Transport and Telecommunication, 6(3), 407 (2005) [Google Scholar]
  • S. Senkevich, V. Bolshev, E. Ilchenko, P. Chakrabarti, M. Jasiński, Z. Leonowicz, M. Chaplygin. Elastic Damping Mechanism Optimization by Indefinite Lagrange Multipliers, IEEE Access, 9, 71784-71804 (2021) doi:10.1109/ACCESS.2021.3078609 [CrossRef] [Google Scholar]
  • R.M. Chalasani, Ride performance potential of active suspension systems - Part II: Comprehensive Analysis Based On A Full-Car Model, Am. Soc. Mech. Eng. Appl. Mech. Div. AMD, 80, 205–234 (1986) [Google Scholar]
  • Z. A. Godzhaev, S. E. Senkevich, V. A. Zubina, T. Z. Godzhaev, Determination of the significance of quality criteria and functional limitations affecting the effectiveness of robotization of mobile energy means in crop production. IOP Conf. Ser.: Earth Environ. Sci., 1138, 012045 (2023) doi: 10.1088/1755-1315/1138/1/012045 [CrossRef] [Google Scholar]
  • R.A. Williams, Electronically controlled automotive suspensions, Comput. Control Eng. J., 5(3), 143–148 (1994) [CrossRef] [Google Scholar]
  • C. Gohrle, et al., Design and Vehicle Implementation of Preview Active Suspension Controllers, IEEE Trans. Control Syst. Technol, 22(3), 1135–1142 (2014) [CrossRef] [Google Scholar]
  • Yu. A. Gurvich, New applied criteria of oscillatory and aperiodic stability of movement of wheels of vehicles, Actual problems in dynamics and strength in theoretical and applied mechanics: Collection of scientific tr., Minsk, 148-162 (2001) [Google Scholar]
  • Yu. A. Gurvich, Substantiation of the methodology and software product of multi-criteria optimization of parameters of various designs of steering trapezoids of the truck family, “Mechanical engineering”. Republican Interdepartmental Collection of scientific papers, Minsk: BNTU, 31, 140-152 (2018) [Google Scholar]
  • Yu.A. Gurvich, Selection of criteria for optimizing vehicle parameters using the grid method, “Mechanical Engineering”. Republican Interdepartmental Collection of scientific papers, Minsk: BNTU, 31, 129-136 (2018) [Google Scholar]
  • A.I. Svitachev, Evaluation of dynamic parameters and characteristics by mathematical models of machine-tractor units and their effective use, Modern technologies. System analysis. Modeling, 4(44) (2014) [Google Scholar]
  • V.L. Zakorotny, Pham Dinh Tung, Nguyen Xuan Thiem, Modeling and identification of inertial and dissipative properties of subsystems of cutting tools and workpieces during turning, Advanced Engineering Research (Rostov-on-Don), 8 (2010) [Google Scholar]
  • V.P. Shevchuk, V.V. Shekhovtsov, E.V. Klementyev, N.S. Dobrev, A.V. Kalmykov, Investigation of dynamic characteristics of the transmission of an agricultural tractor of the 6th traction class, Modern high-tech technologies, 2, 44-49 (2013) [Google Scholar]
  • A. S. Smirnov, B. A. Smolnikov, Optimization of modes of damping oscillations of a spatial double pendulum. I. Statement of the problem, Bulletin of the St. Petersburg University. Mathematics. Mechanics. Astronomy, 9(67), 357-365 (2022) https://doi.org/10.21638/spbu01.2022.215. [Google Scholar]
  • S.A. Partko, Optimization of oscillatory parameters of the running system of the harvester, Advanced Engineering Research (Rostov-on-Don), 8(2), 141-144 (2008) [Google Scholar]
  • Z. Godzhaev, S. Senkevich, I. Malakhov, S. Uyutov, Development of a mathematical model of the oscillatory system of agricultural mobile power equipment with attachments for the creation of their adaptive springing systems, E3S Web of Conf., 413, 02042 (2023) doi: https://doi.org/10.1051/e3sconf/202341302042 [CrossRef] [EDP Sciences] [Google Scholar]
  • S. E. Senkevich, Z. A. Gojaev, E. N. Ilchenko, I. S. Alekseev, Increasing the durability of MES power transmissions by reducing their dynamic loading, Bulletin of the South Ural State University. Series: Mechanical Engineering, 21(3), 22-33 (2021) doi 10.14529/engin210302 [Google Scholar]
  • S.E. Senkevich, N.S. Kryukovskaya, Analysis of Experimental Researches of the Tractor Equipped with an Elastic-Damping Mechanism in the Transmission When Moving in the Composition of the Transport Tractor Unit, Tractors and Agricultural Machinery, 87(6), 59–66 (2020) doi: 10.31992/0321-4443-2020-6-59-66 [CrossRef] [Google Scholar]
  • S. Senkevich, V. Kravchenko, V. Duriagina, A. Senkevich, E. Vasilev, Optimization of the Parameters of the Elastic Damping Mechanism in Class 1,4 Tractor Transmission for Work in the Main Agricultural Operations. In: Vasant P., Zelinka I., Weber GW. (eds) Intelligent Computing & Optimization. ICO 2018. Advances in Intelligent Systems and Computing, Springer, Cham, 866, 168-177 (2019) doi.org/10.1007/978-3-030-00979-3_17 [Google Scholar]
  • Z. A. Gojaev, N. S. Kryukovskaya, S. E. Senkevich, Development of a stand for testing the control system of an unmanned combine harvester, Bulletin of the South Ural State University. Series: Mechanical Engineering, 20(3), 5-14 (2020) doi 10.14529/engin200301 [Google Scholar]
  • Z.A. Godzhaev, S.E. Senkevich, I.S. Alekseev, E.N. Ilchenko, Justifi cation of the parameters of an electromechanical transmission for a tractor of traction class of 0.6-0.9 traction class and coordination of traction characteristics. Agricultural Engineering, Moscow, 25(1), 63-70 (2023) doi.org/10.26897/2687-1149-2023-1-63-70 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.