Issue |
BIO Web Conf.
Volume 37, 2021
International Scientific-Practical Conference “Agriculture and Food Security: Technology, Innovation, Markets, Human Resources” (FIES 2021)
|
|
---|---|---|
Article Number | 00066 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/bioconf/20213700066 | |
Published online | 27 October 2021 |
Optimization of the kinematic mode of operation of the tractor-driven tillage tool
Samara State Agrarian University, Ust-Kinelsky village, Kinel, 446442, Samara region, Russia
* Corresponding author: juri.savelev@mail.ru
A traction-driven tillage tool with low traction resistance has been developed. A decrease in the tractive resistance of the implement is achieved by transferring the main share of the power consumed by the implement to the process of loosening the soil through the tractor power take-off shaft (PTO) to the drive needle discs, which in turn create a pushing force. The efficiency of the technological process of soil cultivation depends on the kinematic mode of operation of each row of disk working bodies of the tractiondrive tillage implements. To optimize their kinematic mode of operation, a multifactorial experiment was carried out, which made it possible to establish the optimal values of such factors as the kinematic parameters of the 1st and 2nd rows of needle disks at the set operating speed of the unit.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.