| Issue |
BIO Web Conf.
Volume 42, 2022
International Scientific and Practical Conference “Sustainable Development of Traditional and Organic Agriculture in the Concept of Green Economy” (SDGE 2021)
|
|
|---|---|---|
| Article Number | 03004 | |
| Number of page(s) | 8 | |
| Section | Bioengineering and Agricultural Machinery | |
| DOI | https://doi.org/10.1051/bioconf/20224203004 | |
| Published online | 13 January 2022 | |
Mechanized Placement of Drip Tape in Potato Comb
1
All-Russian Research Institute of Hydraulic Engineering and Land Reclamation named after A.N. Kostyakov, 127550, Moscow, Russian Federation
2
Russian State Agricultural University - MSHA named after K.A. Timiryazev, 127550, Moscow, Russian Federation
* Corresponding author: nmartinova@rgau-msha.ru
Over the past two years, decrease in potato yield has been observed in the Moscow region. One of the main reasons is unfavorable weather conditions. To obtain a guaranteed yield, as well as to improve the quality of products, it is necessary to carry out reclamation works, including additional irrigation. Creation of the optimal water - air balance of the plant throughout the entire growing season will increase productivity, and improve the quality of agricultural products. Drip irrigation is the most economical method of irrigation, but its widespread use is hindered by the high proportion of manual labor when installing the drip tape. A mechanized method of laying the drip tape by placing the working equipment on the Grimme GF-75/4 comb former is offered. The existing methods for determining the irrigation rate do not consider the parameters of the humidification circuit, which leads to excessive irrigation and additional losses of irrigation water. The paper offers a method for determining the irrigation rate considering the shape of the humidification circuit and its geometric parameters.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.