| Issue |
BIO Web Conf.
Volume 62, 2023
2023 5th International Conference on Environment, Resources and Energy Engineering (EREE 2023)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 5 | |
| Section | Waste Treatment and Solid Waste Utilization | |
| DOI | https://doi.org/10.1051/bioconf/20236202002 | |
| Published online | 07 July 2023 | |
Design and development of community incinerators using the CFD method
School of Engineering, University of Phayao
* Corresponding author: Sutthinan.sr@up.ac.th
The research aims to develop municipal solid waste (MSW) incinerators for higher thermal efficiency and minimal pollution from combustion. The 3D CFD model is developed for incinerators that consist of a combustion chamber and a cyclone. A municipal waste incinerator with a 250 kg/h capacity is modeled. The incinerator model simulated the comparative behavior between the finned and smooth combustion chamber walls. The results indicated that finned-walled incinerators exhibited more turbulent flow and air distribution in the combustion chamber than conventional wall incinerators. This will result in more complete combustion and less pollution.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.