Issue |
BIO Web Conf.
Volume 71, 2023
II International Conference on Current Issues of Breeding, Technology and Processing of Agricultural Crops, and Environment (CIBTA-II-2023)
|
|
---|---|---|
Article Number | 02018 | |
Number of page(s) | 6 | |
Section | Ecology, Environmental Protection and Conservation of Biological Diversity | |
DOI | https://doi.org/10.1051/bioconf/20237102018 | |
Published online | 07 November 2023 |
Ways to reduce friction and wear of fuel elements in nuclear power
Sergo Ordzhonikidze Russian State University for Geological Prospecting, 23, Miklouho-Maclay St., Moscow, 117997, Russia
* Corresponding author: kanareykins@mail.ru
Friction forces affect the strength of the fuel assembly at all stages of its life cycle. The work is devoted to the issues of reducing friction and wear of fuel elements of a nuclear reactor. It presents methods and results of pre-reactor experimental studies of static and dynamic processes involving friction forces. Because of the conducted research, it was found that the transformation of the movable joints of the guide channels and spacing gratings into fixed ones by means of spot welding in “rigid” fuel assemblies, together with other measures, solved the problem of curvature of the fuel assemblies. It is also shown that during the assembly of fuel assemblies, the friction force can be reduced using ultrasound.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.