Effect of blending ratio of biofuel from used cooking oil with Dexlite

¹ Department of Oil and Gas Processing, STT MIGAS, Balikpapan, 76127, Indonesia
² Department of Petroleum Engineering, STT MIGAS, Balikpapan, 76127, Indonesia

^* Corresponding author: lutfi_plhld@yahoo.co.id

Abstract

Indonesia is committed to accelerating the clean energy transition through the biodiesel policy to achieve net zero emission. The commitment to use palm oil as a biofuel base material will support Indonesia in achieving its energy security and energy mix target of 23% in 2025. This article discussed the characteristics of the blended fuel between biofuel from used cooking oil and Dexlite from PERTAMINA products. The blending process is carried out with the biofuel: Dexlite ratio as follows: 5:95, 10:90, 15:85 20:80, 25:75 and 30:70. The results revealed that the best experiments for acid number were obtained at the B5 blending ratio of 0.039 mgKOH/(g sample), saponification number at the B5 blending ratio of 1.066 mgKOH/(g sample), flash point at the B20 blending ratio at a temperature of 101°C, 90% distillation at the B10 blending ratio at a temperature of 213°C, and the density at the blending ratio B15 is 837 kg/m³. From these results, only the density parameter does not meet the biodiesel quality standards based on SNI 7182:2015. These results indicate that the addition of 30% biofuel to Dexlite can still be used as a fuel for diesel vehicles by applying a better washing method for KOH catalyst residue and unreacted methanol residue.