| Issue |
BIO Web Conf.
Volume 105, 2024
IV International Conference on Agricultural Engineering and Green Infrastructure for Sustainable Development (AEGISD-IV 2024)
|
|
|---|---|---|
| Article Number | 03001 | |
| Number of page(s) | 7 | |
| Section | Digital Technologies and Automation in Agriculture | |
| DOI | https://doi.org/10.1051/bioconf/202410503001 | |
| Published online | 26 April 2024 | |
Method for automated diagnostics of the technical condition of a feed crusher
1 Saint-Petersburg State Agrarian University, Pushkin, Saint-Petersburg, 196601, Russia
2 Kazan State Agrarian University, Kazan, 420015, Russia
3 Kazan Federal University, Kazan, 420008, Russia
4 Saint-Petersburg State Forest Technical University, St. Petersburg, 194021, Russia
* Corresponding author: mihanov25@rambler.ru
The material of the scientific article represents a separate stage of research on a topical topic dedicated to increasing the economic efficiency of feed mills. The solution to this problem significantly depends on the technical condition and quality of the work process carried out by technological equipment. Based on an analysis of the state of the issue on the topic under consideration, it was established that the most important and energy-intensive operation of the feed preparation process is grinding, performed in feed crushers. A study of the operating conditions of hammer crushers revealed the least reliable working element - the grinding rotor, the technical condition of which is determined by wear of the support bearings, increased vibration and imbalance. In order to substantiate the method of automated diagnostics of rotor malfunctions during operation, determine the accuracy of manufacturing crushers at factories, and assess the quality of service and repair at service enterprises, a scheme for static and dynamic loading of the rotor has been developed.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.