| Issue |
BIO Web Conf.
Volume 105, 2024
IV International Conference on Agricultural Engineering and Green Infrastructure for Sustainable Development (AEGISD-IV 2024)
|
|
|---|---|---|
| Article Number | 05002 | |
| Number of page(s) | 8 | |
| Section | Biotechnology for Sustainable Soil Management, Geotechnical Engineering and Natural Resource Conservation | |
| DOI | https://doi.org/10.1051/bioconf/202410505002 | |
| Published online | 26 April 2024 | |
Study of soil tillage process from parameters and working depth of the working bod
National Research University TIIAME, Tashkent, Uzbekistan
The article presents the results of experimental studies of the positive influence of the optimal combination of ripping elements with a stand on the quality of soil tillage and traction resistance of the working body. In the experiment, model samples of ripping elements of rectangular shape were tested on a universal dynamometer. It was found that the qualitative and energy characteristics of the working body are mainly influenced by five factors: the depth of cultivation (H), the angle of inclination of the stand (αst) relative to the horizontal, the width (b), the length of outrigger (L) and the cutting angle (β) of ripping elements.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.