| Issue |
BIO Web Conf.
Volume 130, 2024
International Scientific Conference on Biotechnology and Food Technology (BFT-2024)
|
|
|---|---|---|
| Article Number | 03015 | |
| Number of page(s) | 9 | |
| Section | Water Environmental Biotechnology | |
| DOI | https://doi.org/10.1051/bioconf/202413003015 | |
| Published online | 09 October 2024 | |
Selection of an optimal set of machines for sorting and crushing municipal solid waste
1 Kostanay State University A. Baitursynov, Kostanay, Kazakhstan
2 Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: xankelovt9@gmail.com
The article is dedicated to the selection of the optimal set of machines for sorting and crushing municipal solid waste based on its properties and accumulation rates. Considering the properties of waste and technologies for its collection, a new technological scheme for processing municipal solid waste was developed and, based on this scheme, the optimal set of machines was selected. In addition, the research conducted to determine the fractional composition of the waste made it possible to substantiate the diameter of holes in the drum screen mesh. Based on the analysis of the morphological composition of the waste at the end of the technological chain, the type of crusher design was determined and the main parameters of the hammer crusher were substantiated in connection with the technological processing. The optimal set of machines will make it possible to process the components of municipal solid waste for use in the form of secondary raw materials with the least material and time costs.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.