| Issue |
BIO Web Conf.
Volume 144, 2024
1st International Graduate Conference on Smart Agriculture and Green Renewable Energy (SAGE-Grace 2024)
|
|
|---|---|---|
| Article Number | 02001 | |
| Number of page(s) | 9 | |
| Section | Renewable Energy and Sustainable Power Systems | |
| DOI | https://doi.org/10.1051/bioconf/202414402001 | |
| Published online | 25 November 2024 | |
Research, design and manufacture a prototype of solar panel cleaning system via WiFi
1 Institute of Engineering – Technology, Thu Dau Mot University, Vietnam
2 Institute of Southeast Vietnamese Studies, Thu Dau Mot University, Vietnam
* Corresponding Author Email: phuhm@tdmu.edu.vn
This paper presents research of design and manufacturing a prototype of solar panel cleaning system in Vietnam. The 2D and 3D design of this prototype is also shown in this study. The device is used to clean dust accumulated in the face of solar panels so that it can help for enhancing power efficiency of solar panels. The prototype can be controlled manually or automatically via WiFi based on options of control system. An ESP8266 NODEMCU board is used in the hardware of the controller so that it can connect to WiFi, control motors and traveling of the device. An app is set based on Blynk app to control the system via WiFi. Operators can control the system everywhere with WiFi or 5G connection. The device can help to remove dust on solar panels and enhance the power generation efficiency, reduce time, labor, keep safety for cleaning solar panels compared with manual cleaning method.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.