| Issue |
BIO Web Conf.
Volume 145, 2024
International Scientific Forestry Forum 2024: Forest Ecosystems as Global Resource of the Biosphere: Calls, Threats, Solutions (Forestry Forum 2024)
|
|
|---|---|---|
| Article Number | 03022 | |
| Number of page(s) | 12 | |
| Section | Timber Industry and Mechanization of the Forestry Complex | |
| DOI | https://doi.org/10.1051/bioconf/202414503022 | |
| Published online | 28 November 2024 | |
Eco-friendly construction materials: Modified gypsum-containing bind
1 Karakalpak State University named after Bertakha, 230112, Nukus Uzbekistan
2 Moscow State University of Civil Engineering, 129337 Moscow, Russia
3 Moscow Architectural Institute, Moscow, 107031, Russia
4 National Research University Higher School of Economics, 101000, Moscow, Russia
5 Scientific Research Institute of Building Physics of the Russian Academy of Architecture and Building Sciences, 127238, Moscow, Russia
6 Geological Exploration University, 117997, Moscow, Russia
* Corresponding author: mla-gasis@mail.ru
The use of gypsum-containing binders significantly expands both the raw material base and the possibilities of application of materials based on them. Clay-gypsum belongs to this group of binders. Clay-gypsum raw material and binder on its basis are local building materials. Binders based on clay gypsum have advantages under the following conditions: the remoteness of deposits of natural gypsum raw materials and the proximity of production from consumers. Clay gypsum is a natural formation of fine-grained crystalline gypsum, evenly mixed with clay or loam. The amount of gypsum varies from 50 to 95%. The aim of the research was the formation of scientific bases for obtaining clay-gypsum binder stabilized by its properties, as well as the development of optimized parameters for the production of this binder. As a result of research, the technological parameters of receiving clay-no-gypsum binder and modes of its thermal processing (firing) are optimized, and also the influence of technologies on the properties of clay-no-gypsum binder, which can be considered an analogue of binder received from natural gypsum raw material, is studied. It is established that at the age of 28 days of hardening, the compressive strength of clay-gypsum binder fired at the temperature of 250 oC reached 8.8–8.6 MPa, which at the accepted level of security allowed to obtain a binder of G-8 grade. The formation of soluble anhydrite did not exceed 1.5%.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.