| Issue |
BIO Web Conf.
Volume 145, 2024
International Scientific Forestry Forum 2024: Forest Ecosystems as Global Resource of the Biosphere: Calls, Threats, Solutions (Forestry Forum 2024)
|
|
|---|---|---|
| Article Number | 03048 | |
| Number of page(s) | 14 | |
| Section | Timber Industry and Mechanization of the Forestry Complex | |
| DOI | https://doi.org/10.1051/bioconf/202414503048 | |
| Published online | 28 November 2024 | |
Methods of manufacturing long-length power structures made of polymer composite materials
1 Moscow Aviation Institute (National Research University), Volokolamskoe shosse, 4, 125993, Moscow, Russia
2 Voronezh State Technical University, 20th Anniversary of October, 84, 394006, Voronezh, Russia
3 Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, 129337, Russia
4 Moscow State University of Technology and Management named after K.G. Razumovsky (Smolensk branch), 77, Lenin str., 215100, Vyazma, Russia
* Corresponding author: kmit38@mail.ru
This article compares technologies for manufacturing in the designs of modern structures from PCM and their impact on the structure of the finished product. Various methods are known for manufacturing parts and assemblies from PCM: contact, vacuum, autoclave, winding, press chamber, thermocompression, pressure impregnation, infusion, pultrusion, etc. Assessing the advantages and disadvantages of each method allows the designer and technologist to choose the optimal methods for molding products from PCM, which is an urgent task at the present time, when PCM is increasingly used in the designs of modern structures.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.