Issue |
BIO Web Conf.
Volume 146, 2024
2nd Biology Trunojoyo Madura International Conference (BTMIC 2024)
|
|
---|---|---|
Article Number | 01025 | |
Number of page(s) | 5 | |
Section | Dense Matter | |
DOI | https://doi.org/10.1051/bioconf/202414601025 | |
Published online | 27 November 2024 |
A Effectiveness of ozone pasteurization compared to heat treatment in reducing microbial and mold contamination in honey
1 Physics Education, Universitas Sebelas Maret, Indonesia
2 Biology Education, Universitas Sebelas Maret, Indonesia
* Corresponding author: dewanto_h@fkip.uns.ac.id
This study investigates ozone pasteurization as an alternative to heat pasteurization for reducing microbial and mold contamination in honey. Five honey samples with identical compositions were tested: a control, heat treatments at 63°C, 65°C, and 68°C, and ozone treatment at ambient temperature. Mold and bacterial proliferation were monitored over 30 days. Pour Plate analysis showed that ozone treatment significantly reduced mold growth compared to heat treatments. The lowest number of mold colonies was observed in the ozone-treated samples, while the highest was in the 68°C heat-treated samples. Microbial counts were lowest with ozone treatment and at 65°C heat treatment. Ozone pasteurization is an effective and practical method for reducing microbiological contamination in honey.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.