Open Access
| Issue |
BIO Web Conf.
Volume 65, 2023
EBWFF 2023 - International Scientific Conference Ecological and Biological Well-Being of Flora and Fauna (Part 2)
|
|
|---|---|---|
| Article Number | 07006 | |
| Number of page(s) | 17 | |
| Section | Environmental Protection Engineering | |
| DOI | https://doi.org/10.1051/bioconf/20236507006 | |
| Published online | 04 September 2023 | |
- D.P. Sekulić, ed., Advances in brazing: science, technology and applications (Elsevier, 2013) [Google Scholar]
- M. Boretius, H. Klose, Vacuum brazed diamond and CBN tools In International Workshop on Diamond Tool Production as held at the EURO PM 99, 143–149 (1999) [Google Scholar]
- A. Rabinkin, A.E. Shapiro, M. Boretius, Brazing of diamonds and cubic boron nitride. In Advances in brazing (Woodhead Publishing, 2013) [Google Scholar]
- K.M. Rutledge, et al, Handbook of Industrial Diamond and Diamond Films (New York: Marcel Dekker, 1998) [Google Scholar]
- A. Rabinkin, A.E. Shapiro, M. Boretius, Brazing of diamonds and cubic boron nitride. In Advances in brazing (Woodhead Publishing, 2013) [Google Scholar]
- Y.V. Naidich, G.A. Kolesnichenko, I.A. Lavrinenko, Y.F. Motsak, Brazing and metallization of ultrahard tool materials (Kiev, 1977) [Google Scholar]
- Z. Yin, Vacuum brazing of diamond to tungsten carbide (Doctoral dissertation, Montana Tech of The University of Montana, 2016) [Google Scholar]
- Y.V. Naidich, V.P. Umanskii, I.A. Lavrinenko, Strength of Diamond-Metal Contact and Soldering of Diamonds (1988) [Google Scholar]
- C. Artini, M.L. Muolo, A. Passerone, Journal of Materials Science 47(7), 3252–3264 (2012) [Google Scholar]
- B. Azarhoushang, International Journal of Advanced Manufacturing Technology 74(9), 1293–1302 (2014) [CrossRef] [Google Scholar]
- C. Leinenbach, et al, Journal of Materials Engineering and Performance 24(5), 2042–2050 (2015) [Google Scholar]
- J. Lu, et al, Cr. Diamond and Related Materials 90, 116–125 (2018) [CrossRef] [Google Scholar]
- C.M. Sung, Diamond and related materials 8(8-9), 1540–1543 (1999) [CrossRef] [Google Scholar]
- Cui Bing, Tao Shanren, Xue Xingyan, Zhong Sujuan and Xu Dong, China Welding 28(2) (2019) [Google Scholar]
- M.M. Schwartz, Brazing. ASM international (2003) [Google Scholar]
- A.K. Chattopadhyay, L. Chollet, H.E. Hintermann, Surface and Coatings Technology 45(1-3), 293–298 (1991) [CrossRef] [Google Scholar]
- W. Tillmann, A.M. Osmanda, Materials Science Forum 502, 425–430 (2005) [CrossRef] [Google Scholar]
- D.Z. Duan, B. Xiao, B. Wang, P. Han, W.J. Li, S.W. Xia, International Journal of Refractory Metals and Hard Materials 48, 427–432 (2015) [CrossRef] [Google Scholar]
- B. Wang, B. Xiao, Y. Zhu, Transactions of the China Welding Institution 37(2), 85 (2016) [Google Scholar]
- T. Yamazaki, A. Suzumura, Journal of materials science 41(19), 6409–6416 (2006) [Google Scholar]
- M.F. Arenas, V.L. Acoff, R.G. Reddy, Science and technology of welding and joining 9(5), 423–429 (2004) [CrossRef] [Google Scholar]
- M. Singh, T. Matsunaga, H.T. Lin, R. Asthana, T. Ishikawa, Materials Science and Engineering: A 557, 69–76 (2012) [CrossRef] [Google Scholar]
- P. Mukhopadhyay, A. Ghosh, Journal of Materials Processing Technology 266, 198–207 (2019) [Google Scholar]
- S. Zhang, Y. Yuan, Y. Su, X. Song, Journal of Alloys and Compounds 719, 108–115 (2017) [Google Scholar]
- P. Mukhopadhyay, D.R. Simhan, A. Ghosh, Journal of Materials Processing Technology 250, 390–400 (2017) [Google Scholar]
- M. Singh, T.P. Shpargel, G.N. Morscher, R. Asthana, Materials Science and Engineering: A 412(1-2), 123–128 (2005) [CrossRef] [Google Scholar]
- D.K. Basri, L. Sisamouth, Y. Farazila, Y. Miyazawa, T. Ariga, Materials Research Innovations 18(sup 6), S6–429 (2014) [Google Scholar]
- C.P. Deck, K. Vecchio, Carbon 44(2), 267–275 (2006) [CrossRef] [Google Scholar]
- Lu, J., Qi, W., Li, Y., Qi, F., Qian, M. and Qiu, X., International Journal of Refractory Metals and Hard Materials 67, 141–146 (2017) [CrossRef] [Google Scholar]
- Buhl, S., Leinenbach, C., Spolenak, R. and Wegener, K., International Journal of Refractory Metals and Hard Materials 30(1), 16–24 (2012) [CrossRef] [Google Scholar]
- Li, W.C., Lin, S.T. and Liang, C., Metallurgical and Materials transactions A 33(7), 2163–2172 (2002) [CrossRef] [Google Scholar]
- Fu, W., Song, X., Long, L., Chai, J., Feng, J. and Wang, G., Acta Metall Sin 52(6), 734–740 (2016) [Google Scholar]
- Ma, B., Pang, Q. and Lou, J., International Journal of Refractory Metals and Hard Materials 43, 25–29 (2014) [CrossRef] [Google Scholar]
- Klotz, U.E., Liu, C., Khalid, F.A. and Elsener, H.R., Materials Science and Engineering: A 495(1-2), 265–270 (2008) [CrossRef] [Google Scholar]
- Z.B. Yang, Xu J.H., Liu A J. Chinese Journal of Lasers 36(11), 3079 − 3083 (2009) [CrossRef] [Google Scholar]
- Wang, C.Y., Zhou, Y.M., Zhang, F.L. and Xu, Z.C., Journal of Alloys and Compounds 476(1-2), 884–888 (2009) [Google Scholar]
- Lu, J., Qi, W., Zhang, W., Li, Y., Qi, F., Zhong, S. and Xu, S., International Journal of Advanced Manufacturing Technology 90(1), 649–656 (2017) [CrossRef] [Google Scholar]
- Sun, B., Meng, P., Lu, J.B., Zhao, B. and Liu, J.J., Advanced Materials Research 452, 628–632 (2012) [CrossRef] [Google Scholar]
- P. Mukhopadhyay, D.R. Simhan, A. Ghosh, Journal of Materials Processing Technology 250, 390–400 (2017) [Google Scholar]
- Zaharinie, T., Aliff, A., Hamdi, M. and Ariga, T., IOP Conference Series: Materials Science and Engineering 473(1), 012005 (2019) [CrossRef] [Google Scholar]
- Yang, Z.B., Xu, J.H., Fu, Y.C. and Xu, H.J., Key Engineering Materials 359, 43–47 (2008) [Google Scholar]
- Ma, B. and Zhu, H., International Journal of Advanced Manufacturing Technology 86, 1607–1613 (2016) [CrossRef] [Google Scholar]
- Ma, Q., Li, Y., Wu, N. and Wang, J., Journal of materials engineering and performance 22, 1660–1665 (2013) [Google Scholar]
- Wu, N., Li, Y. and Ma, Q., Materials & Design 53, 816–821 (2014) [Google Scholar]
- Ma, Q., Li, Y., Wu, N. and Wang, J., Journal of materials engineering and performance 22, 1660–1665 (2013) [Google Scholar]
- Ma, B. and Yu, Q., Applied surface science 258(10), 4750–4755 (2012) [CrossRef] [Google Scholar]
- Wang, J., Mao, Y., Zhang, M., Ye, N., Dai, S. and Zhu, L., Coatings 13(3), 565 (2023) [CrossRef] [Google Scholar]
- Ma, B. and Yu, Q., International Journal of Advanced Manufacturing Technology 63, 555–560 (2012) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.