Open Access
BIO Web Conf.
Volume 65, 2023
EBWFF 2023 - International Scientific Conference Ecological and Biological Well-Being of Flora and Fauna (Part 2)
Article Number 07010
Number of page(s) 17
Section Environmental Protection Engineering
Published online 04 September 2023
  • K. S. Derekar, Materials science and technology 34(8), 895–916 (2018) [CrossRef] [Google Scholar]
  • T. A. Rodrigues, et al., Materials 12(7), 1121 (2019) [Google Scholar]
  • D. Ding, Z. Pan, D. Cuiuri, H. Li, The International Journal of Advanced Manufacturing Technology 81(1), 465–481 (2015) [CrossRef] [Google Scholar]
  • J. Ding, et al, Computational Materials Science 50(12), 3315–3322 (2011) [CrossRef] [Google Scholar]
  • P.M. Almeida, S. Williams, Innovative process model of Ti-6Al-4V additive layer manufacturing using cold metal transfer (CMT), In 2010 International Solid Freeform Fabrication Symposium. University of Texas at Austin (2010) [Google Scholar]
  • B. Wu, et al, Journal of Manufacturing Processes 35, 127–139 (2018) [Google Scholar]
  • T. Ron, et al, Environmental Behavior of Low Carbon Steel Produced by a Wire Arc Additive Manufacturing Process (University of the Negev, Beer-Sheva 8410501, 2019) [Google Scholar]
  • R. Mehran, et al, Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing (Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John’s, NL A1B 3X5, Canada, 2019). [Google Scholar]
  • T. L. Van, P. Henri, On the use of gas-metal-arc-welding additive manufacturing for repurposing of low-carbon steel components: microstructures and mechanical properties. Institute of Research and Development (Duy Tan University, Da Nang 550000, Vietnam, 2020) [Google Scholar]
  • A. R. Tiago, et al, In-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM) (Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829–516 Caparica, Portugal, 2020) [Google Scholar]
  • M. M. El-Rayes, E. A. El-Danaf, Aluminum Alloy 6082 212(5), 1157 - 1168 (2012) [Google Scholar]
  • B. Bagheri, M. Abbasi, A. Abdollahzadeh, Effect of second-phase particle size and presence of vibration on AZ91/SiC surface composite layer produced by FSP (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.