Open Access
BIO Web Conf.
Volume 71, 2023
II International Conference on Current Issues of Breeding, Technology and Processing of Agricultural Crops, and Environment (CIBTA-II-2023)
Article Number 01057
Number of page(s) 6
Section Issues of Sustainable Development of Agriculture
Published online 07 November 2023
  • Rudakov G M 1974 Technological bases of mechanization of cotton sowing (Tashkent: Fan. UzSSR) 245 [Google Scholar]
  • Goryachkin V P 1968 Collected works in 3 volumes (Moscow: Kolos) 1-2 [Google Scholar]
  • Ponomarev E I 1988 Dependence of soil unloading on the parameters of the working organ - comb-forming. Improvement of machines and mechanisms for cotton growing (Tashkent: CAMASR SAO VASHNIL) 72-77 [Google Scholar]
  • Tukhtakuziev A 1979 Investigation and substantiation of the parameters of the tooth harrow for operation at increased speeds in the cotton-growing zone. Diss.Candidate of Technical Sciences, Tashkent 144 [Google Scholar]
  • Baymetov R I, Mirakhmatov M and Tukhtakuziev A 1985 Tillage at high speeds in the cotton growing zone (Tashkent: Fan. UzSSR) 48 [Google Scholar]
  • Sineokov G N and Panov I M 1977 Theory and calculation of tillage machines. Mechanical engineering 328 [Google Scholar]
  • Pigulevsky M H 1936 Fundamentals and methods of studying soil deformations. TKPSHM (Moscow: Selkhozgiz) 2 421-527 [Google Scholar]
  • Begimov H 1968 Agrotechnical assessment of techniques and tools for pre-sowing treatment of saline soils of the Khorezm region. Dis.cand.agricultural sciences, Urgench 129 [Google Scholar]
  • Nikolaev V A, Kubaev E I and Kryaklina I V 2007 Calculation and graphic work on agricultural machines (Yaroslavl: FGOUVPOYAGSKHA) 85 [Google Scholar]
  • Nikolaev V A 2011 Determination of the kinematic parameters of the impact device of the combined soil tillage tool. Technique in agriculture 1 6-8 [Google Scholar]
  • Nikolaev V A, Yurkov M M and Gorshkov Yu G Evaluation of the work of friction forces during plowing. Mechanization and electrification of agriculture 1 2 [Google Scholar]
  • Nikoforov P E and Surin V V 1968 Dependence of the stability and quality of the tooth harrow on the parameters of the working organs and the speed of movement. Scientific foundations of increasing the working speeds of machine-tractor units (Moscow: Kolos) 324-334 [Google Scholar]
  • Safarov R B 1981 Investigation of optimal parameters, operating modes and forecasting conditions of efficiently-functioning aggregates for pre-sowing tillage in the cotton-growing zone. Diss. Candidate of Technical Sciences, Yangiyu 208 [Google Scholar]
  • Baimetov R I, Tukhtakuziev A and Kurbanov E S 1989 Mounted harrow hitch. Cotton 2 32-32 [Google Scholar]
  • Tukhtakuziev A, Mansurov M and Rasuljonov A 2019 Scientific and technical solutions to ensure the stability of the working depth of tillage machines attached to the frame of the working bodies. Monograph Tashkent, Muxr PRESS 70 [Google Scholar]
  • Tukhtakuziev A, Mansurov M, Rasuljonov A and Karimova D 2020 Scientific bases of ensuring the stability of the working depth of tillage machines, Monograph (Tashkent: Publishing House TURON-IQBOL) 168 [Google Scholar]
  • State acceptance tests of the prototype of the ABN-8.5 mounted harrowing unit. Protocol No. 26-17-89(8075200) SredasMIS 48 [Google Scholar]
  • Shoumarova M and Abdillaev T 2009 Agricultural machinery (Tashkent: publishing house Textbook “TEACHER”) 504 [Google Scholar]
  • Khachatryan H A 1963 The work of tillage tools in mountainous terrain (Yerevan:Armsizdat) 259 [Google Scholar]
  • Tsimeran M Z 1978 Working bodies of tillage machines (Moscow: Mechanical engineering) 296 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.