The effect of heating temperature on the physical and mechanical characteristics of plybamboo prepared from betung bamboo (Dendrocalamus asper)

Open Access

Issue		BIO Web Conf. Volume 77, 2023 The 3^rd International Conference of Lignocellulose (ICONLIG) in conjunction with the 15^th International Symposium of IWoRS (ICONLIG-IWoRS 2023)


Article Number		01008
Number of page(s)		7
Section		Characterization, Modelling, and Applications of Plant Biomass Products for a Sustainable Future
DOI		https://doi.org/10.1051/bioconf/20237701008
Published online		28 November 2023

A. Liana, Pros. Semin. Nas. Biol. di Era Pandemi COVID-19, 6, 54, (2020). [Google Scholar]
BPS. Badan Pusat Statistik, (2021). doi: 5601005. [Google Scholar]
C. P. Maya, Narasimhamurthy, Int. J. Curr. Sci., 5, 62, (2013). [Google Scholar]
J. Suryana, (2012). [Google Scholar]
F. T. Wulandari, I. M. L. Aji, and D. S. Rini, J. Sangkareang Mataram, 4, (2018). [Google Scholar]
E. Arsad, J. Ris. Ind. Has. Hutan, 7, 45, (2015). [CrossRef] [Google Scholar]
F. F. Rynaldo Davinsy, Elvara D Satria, Muhammad I Maulana, Deded S Nawawi, Rita K Sari, Sena Maulana, Wahyu Hidayat, (2019). [Google Scholar]
S. Maulana, (2018). [Google Scholar]
A. Heriyanto, N. Nuriyatin, and P. B. A. Nugroho, J. Glob. For. Environ. Sci., 1, 51, 2021. [Google Scholar]
K. Sugiyanto, “ITTO PD 600 / 11 Rev. 1 (I), 1, 1, (2014). [Google Scholar]
R. Putri, J. Sosek Pekerj. Umum, 4, 1, (2012). [Google Scholar]
D. H. Ana Agustina, Naresworo Nugroho, Effendi Tri Bahtiar, J. Teknol. Ind. Pertan., 25, 174, (2015). [Google Scholar]
H. Nugraha, Widyakala J., 1, 1, (2014). [CrossRef] [Google Scholar]
H. Zhang et al, J. Constr. Build. Mater., 304, (2021) [Google Scholar]
W. Shangguan, Y. Gong, R. Zhao, and H. Ren, J. Wood Sci., 62, 383, (2016). [CrossRef] [Google Scholar]
C. H. Lee, M. J. Chung, C. H. Lin, and T. H. Yang, Constr. Build. Mater., 28, 31, (2012). [CrossRef] [Google Scholar]
F. M. S. Brito, J. B. Paes, J. T. da S. Oliveira, M. D. C. Arantes, G. B. Vidaurre, and V. F. Brocco, Constr. Build. Mater., 190, 719, (2018). [CrossRef] [Google Scholar]
F. T. Wulandari, R. Amin, J. Kehutanan, (2022). [Google Scholar]
Kamal, Parlindungan Manik, and Samuel, J. Tek. Perkapalan, 5, 381, (2017). [Google Scholar]
A. Supriadi, D. R. Trisatya, and I. M. Sulastiningsih, 25, 657, (2020). [Google Scholar]
C. Y. M. Rudi Hartono, Apri Heri Iswanto, Tito Sucipto, Univ. Hasanuddin, 182, (2012). [Google Scholar]
R. Batu Bara, Univ. Sumatera Utara, 1, (2002). [Google Scholar]
R. D. Ono Suparno, J. Teknol. Ind. Pertan., 27, 89, (2017). [CrossRef] [Google Scholar]
S. Maulana, I. Sumardi, N. J. Wistara, N. H. Kim, and F. Febrianto, IOP Conf. Ser. Mater. Sci. Eng., 935, (2017). [Google Scholar]
Y. Zhang, X. Zhang, Y. Yu, W. Che, X. Zhang, and J. Hou, RSC Adv., 10, 43438, (2020). [CrossRef] [Google Scholar]
Y. M. Zhang, Y. L. Yu, and W. J. Yu, Eur. J. Wood Wood Prod., 71, 61, (2013). [CrossRef] [Google Scholar]
Q. B. Bui, A. C. Grillet, and H. D. Tran, Sustain., 9, (2017). [Google Scholar]
X. Wang et al., J. Wood Sci., 66, (2020). [Google Scholar]
ASTM,. USA (United Stated America): Standard Test Methods of Smal Clear Specimen of Wood, 2005. [Google Scholar]
N. E. Helwig, S. Hong, and E. T. Hsiaowecksler, 1. [Google Scholar]
T. H. Yang, C. H. Lee, C. J. Lee, and Y. W. Cheng, Constr. Build. Mater., 119, 251, (2016). [CrossRef] [Google Scholar]
F. Mburu, S. Dumarçay, J. F. Bocquet, M. Petrissans, and P. Gérardin, Polym. Degrad. Stab., 93, 401, (2008). [CrossRef] [Google Scholar]
I. G. L. B. Eratod. (2017). [Google Scholar]
D. S. Korkut, S. Korkut, I. Bekar, M. Budakçi, T. Dilik, and N. Çakliclier, Int. J. Mol. Sci., 9, 1772, (2008). [CrossRef] [Google Scholar]
T. C. Yang and T. Y. Lee, Constr. Build. Mater., 187, 406, (2018). [CrossRef] [Google Scholar]
Sushardi, H. B. Woesono, and D. S. Hadi, J. Wana Trop., 13, 1, (2023). [CrossRef] [Google Scholar]
C. H. Lee, T. H. Yang, Y. W. Cheng, and C. J. Lee, Constr. Build. Mater., 178, 59, (2018). [CrossRef] [Google Scholar]
J. S. Tumuluru, S. Sokhansanj, J. R. Hess, C. T. Wright, and R. D. Boardman, (2011). [Google Scholar]
F. D. Meng, Y. L. Yu, Y. M. Zhang, W. J. Yu, and J. M. Gao, Appl. Surf. Sci., 371, 383, (2016). [CrossRef] [Google Scholar]
M. Akgül, E. Gümüşkaya, and S. Korkut, Wood Sci. Technol., 41, 281, (2007). [CrossRef] [Google Scholar]
C. B. Vick, Mater., 9, (1999). [Google Scholar]
L. Hanif and Rozalina, J. Akar, 9, 50, 2020. [CrossRef] [Google Scholar]
Abdurachman and N. Hadjib, J. Teknol. Has. Hutan, 191, (2008). [Google Scholar]
M. Nurhanisa, D. Wahyuni, J. Prof, and H. H. Nawawi, 11, 126, (2021). [Google Scholar]
I. M. Sulastiningsih, S. Ruhendi, M. Y. Massijaya, W. Darmawan, and A. Santoso, J. Penelit. Has. Hutan, 32, 221, (2014). [CrossRef] [Google Scholar]
I. M. Sulastiningsih, A. Santoso, and K. Krisdianto, J. Penelit. Has. Hutan, 34, 167, (2016). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.