Open Access
Issue
BIO Web Conf.
Volume 97, 2024
Fifth International Scientific Conference of Alkafeel University (ISCKU 2024)
Article Number 00042
Number of page(s) 19
DOI https://doi.org/10.1051/bioconf/20249700042
Published online 05 April 2024
  • B. B. Broms, “Lateral resistance of piles in cohesionless soils,” ASCE Journal of the Soil Mechanics and Foundations Division, 90(SM3): 123–156, 1964a. [CrossRef] [Google Scholar]
  • B. B. Broms, “Lateral resistance of piles in cohesive soils,” ASCE Journal of the Soil Mechanics and Foundations Division, 90(SM2): 27–63, 1964b. [CrossRef] [Google Scholar]
  • T. R. Chari, and G. G. Meyerhof, “Ultimate capacity of rigid single piles under inclined loads in sand,” Canadian Geotechnical Journal, 20: 849–854, 1983. [CrossRef] [Google Scholar]
  • G. G. Meyerhof and V. V. R. N. Sastry, “Bearing capacity of rigid piles under eccentric and inclined loads,” Canadian Geotechnical Journal, 22: 267–276, 1985 [CrossRef] [Google Scholar]
  • G. G. Meyerhof and V. V. R. N. Sastry, “Full-displacement pressuremeter method for rigid piles under lateral loads and moments,” Canadian Geotechnical Journal 24.4: 471–478, 1987. [CrossRef] [Google Scholar]
  • V. V. R. N. Sastry and G. G. Meyerhof, “Lateral soil pressures and displacements of rig!d piles in homogeneous soils under eccentric and inclined loads,” Canadian Geotechnical Journal, 23: 281–286, 1986. [CrossRef] [Google Scholar]
  • H. G. Poulos, and E. H. Davis, “Pile foundation analysis and design” (Vol. 397). New York: Wiley, 1980. [Google Scholar]
  • G. G. Meyerhof and G. Ranjan, “The bearing capacity of rigid piles under inclined loads in sand. I: Vertical piles,” Canadian Geotechnical Journal 9.4: 430–446, 1972. [CrossRef] [Google Scholar]
  • E. Conte, L. Pugliese, A. Troncone, M. Vena, “A Simple Approach for Evaluating the Bearing Capacity of Piles Subjected to Inclined Loads,” International Journal of Geomechanics, 21(11):04021224-. DOI: 10.1061/(ASCE)GM.1943-5622.0002215, 2021. [CrossRef] [Google Scholar]
  • S. M. Chirlam Charla, T. Munaga, and K. K. Gonavaram, “Influence of Inclined Loads on the Behaviour of Piles—A Numerical Study,” Indian Geotechnical Conference. Singapore: Springer Nature Singapore, 2021. [Google Scholar]
  • R. K. Kalthiya, J. Dave, and M. V. Shah, “Model Study on Single Pile Subjected to Axial and Inclined Load Embedded in Contaminated Soil,” Indian Geotechnical Conference. Singapore: Springer Nature Singapore, 2021. [Google Scholar]
  • ASTM, D 2216 98, “Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by mass”, 2000. [Google Scholar]
  • ASTM D1556-07, “Standard Test Method for Density and Unit Weight of Soil In Place By The Sand-Cone Method”. [Google Scholar]
  • ASTM D422, “Standard Test Method for Particle Size Analysis of Soils,” American Society for Testing and Materials, 2000. [Google Scholar]
  • ASTM International - ASTM D698-07, “Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort”. [Google Scholar]
  • ASTM D3080, “Standard Test Method for Direct Shear Test of Soils under Consolidated Drained Conditions,” Philadelphia, PA: American Society of Testing Materials, 2014. [Google Scholar]
  • ASTM D4254, “Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density,” Philadelphia, PA: American Society of Testing Materials, 2014. [Google Scholar]
  • ASTM D854, “Standard Test Method for Specific Gravity of Soil Solids by Water Pycnometer,” American Society for Testing and Materials, 2005. [Google Scholar]
  • M. D. Bolton, M. W. Gui, J. Garnier, J. F. Corte, G. Bagge, J. Laue, and R. Renzi, “Centrifuge cone penetration tests in sand,” Géotechnique 49, no. 4: 543–552, 1999. [CrossRef] [Google Scholar]
  • M. F. Al-Zrejawi, “Performance of Pile Foundations under Axial Loading for Cohesive Soil,” M. Sc. thesis, University of Kufa, 2022. [Google Scholar]
  • ASTM D 4643-17. “Standard test method for determination of water content of soil and rock by microwave oven heating,” 2017. [Google Scholar]
  • M. N. Som and S. C. Das, “Theory and practice of foundation design,” PHI Learning Pvt. Ltd., 2003. [Google Scholar]
  • V. N. S. Murthy, “Geotechnical engineering: principles and practices of soil mechanics and foundation engineering,” CRC press, 2002. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.