Open Access
| Issue |
BIO Web Conf.
Volume 97, 2024
Fifth International Scientific Conference of Alkafeel University (ISCKU 2024)
|
|
|---|---|---|
| Article Number | 00096 | |
| Number of page(s) | 13 | |
| DOI | https://doi.org/10.1051/bioconf/20249700096 | |
| Published online | 05 April 2024 | |
- K. Mahdy, K.A. Kassim, and A. Adnan, “Development of curves of laterally loaded piles in cohesionless soil,” The scientific world journal 2014. [Google Scholar]
- U. Salini and M.S. Girish, “Lateral load capacity of model piles on cohesionless soil,” Electron. J. Geotech. Eng 14: 1–11, 2009. [Google Scholar]
- L.A. Ghabezloo, S. Sulem, J. Randolph, M.F. Kham, and E. Palix, “Pile response to multi-directional lateral loading using P-y curves approach,” Géotechnique, 71(4), 288–298, 2021. [CrossRef] [Google Scholar]
- S. Mahmoud, A.M. Radwan, M.B. Anwar, “Behaviour of piles subjected to lateral forces in cohesive soil,” 171:260–268. DOI: 10.21608/ERJ.2021.194789, 2021. [Google Scholar]
- L. Luan, L. Gao, G. Kouretzis, X. Ding, H. Qin, and C. Zheng, “Response of pile groups in layered soil to dynamic lateral loads,” Computers and Geotechnics 142: 104–564, 2022. [Google Scholar]
- M. Taha, K. Mohammed, A. Al-Neami, and F.H. Rahil. “Experimental and Numerical Study on the Winged Pile-Soil Interaction under Lateral Loads,” IOP Conference Series: Earth and Environmental Science. Vol. 961. No. 1. IOP Publishing, 2022. [Google Scholar]
- C. Jiang, L. Liu, J. He, H. Xie, “Effect of the proximity of slope and pile shape on lateral capacity of piles in clay slopes,” European Journal of Environmental and Civil Engineering 27, no. 1: 16–30, 2023. [CrossRef] [Google Scholar]
- N. Begum and K. Muthukkumaran, “Experimental investigation on single model pile in sloping ground under lateral load,” International Journal of Geotechnical Engineering 3, no. 1: 133–146, 2009. [CrossRef] [Google Scholar]
- Z.H. Chik, J.M. Abbas, M.R. Taha, and Q.S.M. Shafiqu, “Lateral behavior of single pile in cohesionless soil subjected to both vertical and horizontal loads,” European Journal of Scientific Research 29, no. 2: 194–205, 2009. [Google Scholar]
- ASTM, 2000, D 2216 98, Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by mass. [Google Scholar]
- ASTM D1556-07 Standard Test Method for Density and Unit Weight of Soil In Place By The Sand-Cone Method. [Google Scholar]
- ASTM D422-2000, “Standard Test Method for Particle Size Analysis of Soils”, American Society for Testing and Materials. [Google Scholar]
- ASTM International - ASTM D698-07 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort. [Google Scholar]
- ASTM D3080. (2014). Standard Test Method for Direct Shear Test of Soils under Consolidated Drained Conditions. Philadelphia, PA: American Society of Testing Materials. [Google Scholar]
- ASTM D4254. (2014). Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density. Philadelphia, PA: American Society of Testing Materials. [Google Scholar]
- ASTM D854-2005, “Standard Test Method for Specific Gravity of Soil Solids by Water Pycnometer”, American Society for Testing and Materials. [Google Scholar]
- M.D. Bolton, M.W. Gui, J. Garnier, J.F. Corte, G. Bagge, J. Laue, and R. Renzi, “Centrifuge cone penetration tests in sand,” Géotechnique 49, no. 4: 543–552, 1999. [CrossRef] [Google Scholar]
- M.F. Al-Zrejawi, “Performance of Pile Foundations under Axial Loading for Cohesive Soil,” M. Sc. thesis, University of Kufa, 2022. [Google Scholar]
- H.G. Poulos, and E.H. Davis, “Pile foundation analysis and design” (Vol. 397). New York: Wiley, 1980. [Google Scholar]
- ASTM D 4643-17. “Standard test method for determination of water content of soil and rock by microwave oven heating,” 2017. [Google Scholar]
- M.N. Som and S.C. Das, “Theory and practice of foundation design” PHI Learning Pvt. Ltd., 2003. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.