Application of capacity sensor control in the organic waste bioconversion process to optimize standard time and work posture assessment

Open Access

Issue		BIO Web Conf. Volume 146, 2024 2^nd Biology Trunojoyo Madura International Conference (BTMIC 2024)


Article Number		01016
Number of page(s)		6
Section		Dense Matter
DOI		https://doi.org/10.1051/bioconf/202414601016
Published online		27 November 2024

P. Arsiwi, P. W. Adi, Interpretive Structural Modelling Untuk Meningkatkan Daya Saing Rantai Pasok UKM Mina Indo Sejahtera, Jurnal PASTI, 14, 1, 26–36, (2020), https://doi.org/10.22441/pasti.2020.v14i1.003 [Google Scholar]
P. Arsiwi, P. W. Adi, Strategi Peningkatan Keunggulan Kompetitif UKM Mina Indo Sejahtera Dengan Metode Interpretive Structural Modelling dan Analytic Network Process, JURNAL TEKNIK INDUSTRI, 10, 3, (2020), https://doi.org/10.25105/jti.v10i3.8407 [Google Scholar]
P. Arsiwi, P. W. Adi, D. S. Nugroho, P. Kusumo, Pendampingan Eskalasi Bisnis UKM Mina Indo Sejahtera Melalui Diversifikasi dan Nilai Tambah Produk Olahan Lele Sehat, ABDIMASKU: JURNAL PENGABDIAN MASYARAKAT, 3, 2, (2020), https://doi.org/10.33633/ja.v3i2.90 [Google Scholar]
P. Arsiwi, D. S. Nugroho, S. Anjani, M. T. J Arrafie, Pendampingan Perancangan Kursi Kerja Produksi dan Sistem Tandon Air untuk Meningkatkan Produktivitas Pada UKMMina Indo Sejahtera, ABDIMASKU: JURNAL PENGABDIAN MASYARAKAT, 5, 3, (2022), https://doi.org/10.33633/ja.v5i3.692 [Google Scholar]
P. Arsiwi, D. K. Wijaya, P. W. Adi, Optimasi Lokasi Distribution Center UKM Mina Indo Sejahtera dengan Model Matematis Haversin dan Centre of Gravity Adjusting, JURNAL TEKNIK INDUSTRI, 11, 3, (2021), https://doi.org/10.25105/jti.v11i3.13070 [Google Scholar]
Y. A. A. Huda, P. Arsiwi, Proposed Machine Maintenance Management To Reduce Breakdown In Kacang Atom Production Process PT. XYZ With Preventive Maintenance Method, OPSI, 15, 2, (2022), https://doi.org/10.31315/opsi.v15i2.8046 [Google Scholar]
N. Siswaningsih, P. Arsiwi, T. Talitha, Analisis Rantai Pasok dan Rantai Nilai pada Produk Ikan Asap Manyung Dalam Meningkatkan Penjualan di Sentra Pengolahan Ikan “Asap Indah” Desa Wonosari Demak, Opsi, 14, 2, (2021) [Google Scholar]
R. Setyaningrum et al., Pengembangan Sustainable Waste Management (SWM) Pengelolaan Limbah Organik Kota Semarang melalui Smart Production Berbasis Internet of Things melalui kerjasama Kelompok Petani Maggot dan PT. Biomagg Sinergi Internasional untuk Mendukung Industrialisasi dan Ketahanan Pangan - Penelitian Matching Fund Kedaireka, (2022) [Google Scholar]
R. Setyaningrum, D. Aldo, D. R. Sawitri, Optimizing the Volume of Plastic Bottle using Mechanical Press Machine Designed Based on Rational Methods, AES Journal, 54, 6, (2022) [Google Scholar]
Silvia, R. Setyaningrum, D. N. Izzhati, Identification of Potato Supply Chain Network Design To Increase Farmer’s Income, The International Seminar on Application for Technology of Information and Communication, IEEE, (2022) [Google Scholar]
R. Setyaningrum, Subagyo, A. R. Wijaya, Mathematical Model of Successful-Product Development by Considering The Indonesian Culture, Internasional Journal of Technology, 13, 3, (2022) [Google Scholar]
R. Setyaningrum, T. Ayu, Perancangan Jaringan Rantai Pasok Sampah Organik Menjadi Pakan Ternak Lele yang optimal Jurnal llmiah Teknik Industri (J-umal Keilmuan Teknik dan Manajemen Industri), WTAR, (2021), http:/iiournal. P-ISSN: 2337-5841 and E-ISSN: 2355-6528 [Google Scholar]
R. Setyaningrum, P. Kusumo, Design of an Ergonomic Cracker Dryer to Increase Production at Rahayu Krupuk SME, Apcorise, (2021) [Google Scholar]
R. Setyaningrum, Subagyo, A. R. Wijaya, A Matematical Model of Factor Driving Product Success in an Indonesian market using Design of Experiment, Internasional Journal of Technology, 11, 2, (2020) [Google Scholar]
R, Yusianto, Intelligent Spatial Decision Support System Concept in the Potato Agro-Industry Supply Chain, International Conference on Computer Science and Its Application in Agriculture, ICOSICA, (2020) [Google Scholar]
R. Setyaningrum. T. Ayu, Model dan Simulasi Alur Rantai Pasok Sampah Organik Menjadi Pakan Ternak Lele. (TEKINFO - Jurnal Ilmiah Teknik Industri dan Informasi, 8. 2. (2020) [Google Scholar]
R. Yusianto, Intelligent Spatial Logistics DSS for tracking and tracing in horticultural food security, The International Seminar on Application for Technology of Information and Communication, (2019) [Google Scholar]
R. Setyaningrum, Vania, D. N. Izzhati, Penerapan Manajemen Administrasi Pengelolaan Sampah Berbasis Android untuk Meningkatkan Produktivitas Pada Bank Sampah Resik Becik, (International Conference, 8th Anuual Conference on Industrial and System Engineering (ACISE) 2021 and 1st International Conference on Ergonomics Safety and Healty (ICESH), (2021) [Google Scholar]
R. Setyaningrum, P. Kusumo, Perancangan alat pengering Krupuk dengan metode Rasional, (The 4th Asia Pasific Conference on Research in Industrial and System Engineering (APCORISE), (2021) [Google Scholar]
R. Setyaningrum, P. Arsiwi, T. Talitha, D. N. Izzhati, Dynamic System Simulation to Improve the Effectiveness and Efficiency of Supply Chain Performance and Behaviour on Waste Bank Resik Becik, International Journal of Technology, (2024) [Google Scholar]
R. Setyaningrum et al, A Supply Chain Flow Information System and Community Behaviour in Waste Management based on Industry 4.0, Isemantic IEEE, (2023) [Google Scholar]
R. Setyaningrum, P. Arsiwi, S. Rohman, S. Ramdhani, Kajian Makroergonimi & Sistem Informasi Waste Management Sampah Organik, Penerbit Nasya Expanding Management, (2024) [Google Scholar]
Setyaningrum, Buku Panduan Aplikasi Management Admisnistrasi Pengelolaan Sampah Berbasis Android, pengakuan dari Kementerian Hukum dan Hak Asasi Manusia, Tahun 2023, dengan Surat Pencataan Ciptaan Nomor, (2023) [Google Scholar]
Setyaningrum, Aplikasi Smart Waste Management Produk Organik Berbasis Website, mendapat pengakuan dari Kementerian Hukum dan Hak Asasi Manusia, Tahun 2023, dengan Surat Pencataan Ciptaan Nomor: EC00202360481, (2023) [Google Scholar]
Setyaningrum, desain industri box pengembangan magot, pemeriksaan subtansif1, (2023) [Google Scholar]
R. Setyaningrum, D. W. Waluyo, S. Asfawi, Rancang Bangun e-Health Penjaminan Kualitas Air Minum Isi Ulang untuk Mensukseskan Indonesia Sehat, Hibah Bersaing, (2012) [Google Scholar]
R. Setyaningrum, Aryati, S. Asfawi, Implementasi Model Pemberdayaan UKM Batik Dalam Upaya Mengangkat Kearifan Lokal Batik, Hibah Bersaing, (2013) [Google Scholar]
R. Setyaningrum, D. W. Hartini, S. Asfawi, Pengembangan Model PUGAR Berbasis Sustainable Manufacturing untuk Meningkatan Swasembada Garam Industri, Hibah Bersaing, (2014) [Google Scholar]
R. Setyaningrum, Subagyo, A. A. Wijaya, Mathematical Model of Successful Product Development by Considering The Indonesian Culture, jurnal ilmiah International Journal of Technology, 13, 3, 655–663, Universitas Indonesia, (2022) [Google Scholar]
R. Setyaningrum, D. N. Izzhati, R. Sawitri, Pengembangan Start Up dan Riset. Pengolahan Limbah Plastik Untuk Mewujudkan Kota Semarang, Matching Fund Kedaireka, (2021) [Google Scholar]
R. Setyaningrum, P. Arsiwi, Jazuli, T. Talitha, Pengembangan Sustainable Waste Management (SWM) Pengelolaan Limbah Organik Kota Semarang melalui Smart Production Berbasis IoT melalui kerjasama kelompok Petani Magot dan PT Biomagg Sinergi International untuk mendukung industrialisasi, Matching Fund Kedaireka, (2022) [Google Scholar]
R. Setyaningrum, P. Arsiwi, S. Rohman, S. Yusianto, Penguatan Sustainable Waste Management (SWM) Pengelolaan Limbah Organik Kota Semarang melalui Circular Supply Chain dan Intellegence Digital SCM Bekerjasama dengan PT Biomagg Sinergi Interntional, Matching Fund Kedaireka, (2023) [Google Scholar]
N. Z. N. Aminah, A. Muliawati, Pengelolaan Sampah dalam Konteks Pembangunan Berkelanjutan, Himpunan Mahasiswa Geografi Pembangunan Fakultas Geografi Universitas Gadjah Mada, (2021) [Google Scholar]
Waste Portal, Integrated Sustainable Waste Management (ISWIM), (2023) [Google Scholar]
R. Gaikward, P. Sunnapwar, The role of Lean Manufacturing Practise in Greener Production: A way to reach Susitanability, International Journal of Industrial and Manufacturing System Engineering, 5, 1, 1–5, (2020) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.