Open Access
| Issue |
BIO Web Conf.
Volume 199, 2025
2nd International Graduate Conference on Smart Agriculture and Green Renewable Energy (SAGE-Grace 2025)
|
|
|---|---|---|
| Article Number | 02010 | |
| Number of page(s) | 10 | |
| Section | Green Renewable Energy | |
| DOI | https://doi.org/10.1051/bioconf/202519902010 | |
| Published online | 05 December 2025 | |
- E. P. Purnomo, T. Khairunisa, and C. F. Hung, “Renewable Energy and the Future of a Sustainable Economy in Indonesia,” in IOP Conference Series: Earth and Environmental Science, Institute of Physics, 2024. https://doi.org/10.1088/1755- 1315/1404/1/012051. [Google Scholar]
- F. Halter et al., “Recyclable metal fuels as future zero-carbon energy carrier,” Applications in Energy and Combustion Science, vol. 13, Mar. 2023, https://doi.org/10.1016/j.jaecs.2022.100100. [Google Scholar]
- M. V. Bozorg et al., “Numerical simulation of the heterogeneous combustion of dust clouds containing polydisperse porous iron particles,” Energy, vol. 212, Dec. 2020, https://doi.org/10.1016/j.energy.2020.118759. [Google Scholar]
- P. Debiagi, R. C. Rocha, A. Scholtissek, J. Janicka, and C. Hasse, “Iron as a sustainable chemical carrier of renewable energy: Analysis of opportunities and challenges for retrofitting coal-fired power plants,” Renewable and Sustainable Energy Reviews, vol. 165, Sep. 2022, https://doi.org/10.1016/j.rser.2022.112579. [Google Scholar]
- M. Baigmohammadi, W. Prasidha, N. C. Stevens, Y. L. Shoshyn, T. Spee, and P. de Goey, “Towards utilization of iron powders for heating and power,” Applications in Energy and Combustion Science, vol. 13, Mar. 2023, https://doi.org/10.1016/j.jaecs.2023.100116. [Google Scholar]
- J. F. Brilhac et al., “Heat generation from swirl-stabilized aluminum-air flames,” Fuel, vol. 381, Feb. 2025, https://doi.org/10.1016/j.fuel.2024.133494. [Google Scholar]
- M. Bracconi, “CFD modeling of multiphase flows with detailed microkinetic description of the surface reactivity,” Chemical Engineering Research and Design, vol. 179, pp. 564–579, Mar. 2022, https://doi.org/10.1016/j.cherd.2022.01.042. [Google Scholar]
- S. R. Idelsohn, J. M. Gimenez, R. Löhner, and E. Oñate, “A multiscale approach for the study of particle-laden flows using a continuous model,” Comput Methods Appl Mech Eng, vol. 401, Nov. 2022, https://doi.org/10.1016/j.cma.2022.115174. [Google Scholar]
- W. Prasidha, M. Baigmohammadi, Y. Shoshin, and P. de Goey, “Optimizing iron powder combustion: Influence of particle size on flame stability, nanoparticle formation, and nitric oxide emission,” Combust Flame, vol. 275, May 2025, https://doi.org/10.1016/j.combustflame.2025.114068. [Google Scholar]
- S. Li et al., “Ignition and combustion behavior of single micron-sized iron particle in hot gas flow,” Combust Flame, vol. 241, Jul. 2022, https://doi.org/10.1016/j.combustflame.2022.112099. [Google Scholar]
- W. Yousef, Z. Li, K. Zhou, and J. Yan, “A Novel Methodology for Calculating Combustion Characteristics Across the Combustion Zone Length,” Energies (Basel), vol. 18, Mar. 2025, https://doi.org/10.3390/en18061470. [Google Scholar]
- A. Agarwal, M. K. W. Kalenga, and M. Ilunga, “CFD Simulation of Fluid Flow and Combustion Characteristics in Aero-Engine Combustion Chambers with Single and Double Fuel Inlets,” Processes, vol. 13, Jan. 2025, https://doi.org/10.3390/pr13010124. [Google Scholar]
- A. Hosseini, J. L. T. Hage, K. Meijer, E. Offerman, and Y. Yang, “On the Importance of Model Selection for CFD Analysis of High Temperature Gas-Solid Reactive Flow; Case Study: Post Combustion Chamber of HIsarna Off-Gas System,” Processes, vol. 11, Mar. 2023, https://doi.org/10.3390/pr11030839. [Google Scholar]
- I. Monge-Concepción, R. A. Berdanier, M. D. Barringer, K. A. Thole, and C. Robak, “Evaluating the effect of vane trailing edge flow on turbine rim sealing,” J Turbomach, vol. 142, Aug. 2020, https://doi.org/10.1115/1.4047611. [Google Scholar]
- C. Suvanjumrat et al., “CFD analysis of microscopic particle separation in low- volumetric classifiers: DPM tracking and experimental validation for enhanced efficiency using geometric modification strategy,” Chemical Engineering Journal, vol. 502, Dec. 2024, https://doi.org/10.1016/j.cej.2024.157997. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.