Open Access
| Issue |
BIO Web Conf.
Volume 199, 2025
2nd International Graduate Conference on Smart Agriculture and Green Renewable Energy (SAGE-Grace 2025)
|
|
|---|---|---|
| Article Number | 05011 | |
| Number of page(s) | 10 | |
| Section | Sustainable Land Planning and Construction | |
| DOI | https://doi.org/10.1051/bioconf/202519905011 | |
| Published online | 05 December 2025 | |
- Zhang, W., & Xu, J., Advanced lightweight materials for Automobiles: A review Mater & Dsgn, 221, 110994 (2022) https://doi.org/10.1016/j.matdes.2022.110994. [Google Scholar]
- Guo, H., Zhou, X., & Liu, Z. Advanced Lightweight Structural Materials for Automobiles: Properties, Manipulation, and Perspective, Science of Advanced Materials, 16, 5 (2024) https://doi.org/10.1166/sam.2024.4686. [Google Scholar]
- J.H. Jeon, J.H. Shin, and D.H. Bae, Si phase modification on the elevated temperature mechanical properties of Al-Si hypereutectic alloys, Mater Sci and Eng, 784 (2019), https://doi.org/10.1016/j.msea.2019.01.119. [Google Scholar]
- Wang, Y., Zhang, J., Sun, C. et al. Hypereutectic Al-Si Matrix Composites Prepared by In Situ Fe2O3/Al System. J. Wuhan Univ. Technol.-Mat. Sci. 36 (2021), https://doi.org/10.1007/s11595-021-2455-1. [Google Scholar]
- Rong, X., Zhao, D., He, C., & Zhao, N. J. Review: recent progress in aluminum matrix composites reinforced by in situ oxide ceramics, Mater. Sci. 59, 22 (2024) https://doi.org/10.1007/s10853-023-09120-z. [Google Scholar]
- Singhal, V., Shelly, D., Babbar, A., Lee, S. Y., & Park, S. J. Lubricants, Review of Wear and Mechanical Characteristics of Al-Si Alloy Matrix Composites Reinforced with Natural Minerals, 12, 10 (2024) https://doi.org/10.3390/lubricants12100350. [Google Scholar]
- Kumar, R., Kumar, V., Prasad, C. D., Sridevi, G., CR, A., Kumar, A., & Aden, A. Estimating and parametrically improving the microstructure, hardness, and wear resistance of SiC-CeO2 reinforcements on hot rolled Al7075 hybrid composites, Reslts. in Eng. 26, 104634 (2025) https://doi.org/10.1016/j.rineng.2025.104634. [Google Scholar]
- Dong, B. X., Li, Q., Wang, Z. F., Liu, T. S., Yang, H. Y., Shu, S. L., & Zhang, L. C. Enhancing strength-ductility synergy and mechanisms of Al-based composites by size- tunable in-situ TiB2 particles with specific spatial distribution, Composites Part B: Eng. 217, 108912 (2021) https://doi.org/10.1016/j.compositesb.2021.108912. [Google Scholar]
- Wang, Y., & Monetta, T. J. Mater. Systematic study of preparation technology, microstructure characteristics and mechanical behaviors for SiC particle-reinforced metal matrix composites, Resrch. and Tech. 25 (2023) https://doi.org/10.1016/j.jmrt.2023.07.145. [Google Scholar]
- Xi, L., Guo, S., Gu, D., Guo, M., & Lin, K. Microstructure development, tribological property and underlying mechanism of laser additive manufactured submicro-TiB2 reinforced Al-based composites, J. Alloys and Compds. 819 (2020) https://doi.org/10.1016/j.jallcom.2019.152980. [Google Scholar]
- Ranjan, S., & Jha, P. K., Investigation of Solidification Behavior and Strengthening in Al-Si Based Hybrid Composites Fabricated Through In-Situ Stir Casting Route, Silicon, 17, 6 (2025) https://doi.org/10.1007/s12633-025-03280-0. [Google Scholar]
- Sahoo, S. K., Majhi, J., Patnaik, S. C., Sahoo, B. P., Sahoo, A., & Behera, A. Microstructure characterisation and dry sliding wear behaviour of Al-Si near eutectic and hypereutectic alloys reinforced with in-situ TiB2 synthesized by stir casting route. Discover Materials, 4, 1 (2024) https://doi.org/10.1007/s43939-024-00163-w. [Google Scholar]
- Hullur, M. K., Goudar, D. M., Venkateshwaralu, K., & Kori, S. A. Sliding Wear Behaviour of In Situ TiB2 Reinforced Hypoeutectic Al-Si Alloy Composites, Int. J. of Metalcasting, 17, 2 (2023) https://doi.org/10.1007/s40962-022-00847-0. [Google Scholar]
- Kong, Z., Wang, Z., Chen, B., Li, Y., & Li, R. Effect of Ball Milling Time on the Microstructure and Properties of High-Silicon–Aluminum Composite, Materials, 16, 17 (2023) https://doi.org/10.3390/ma16175763. [Google Scholar]
- Jafari, A., Dehghani, K., Bahaaddini, K., & Hataie, R. A. Experimental comparison of abrasive and erosive wear characteristics of four wear-resistant steels, Wear, 416 (2018) https://doi.org/10.1016/j.wear.2018.09.010. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.