Open Access
Issue
BIO Web Conf.
Volume 209, 2026
The 1st International Conference on Biological Technology for Sustainable Nature (IC-BioTEStA 2025)
Article Number 02006
Number of page(s) 9
Section Biotechnology
DOI https://doi.org/10.1051/bioconf/202620902006
Published online 09 January 2026
  • T. O. Ale, K. Rotipin, and T. D. Makanju, "Temperature Effects on Optimal Performance of PV Module," Journal of Engineering Advancements, pp. 162–165, Dec. 2022, doi: 10.38032/jea.2022.04.004. [Google Scholar]
  • L. Cigarruista Solis, M. Chen Austin, E. Deago, G. Lopez, and N. Marin-Calvo, "Rice Husk-Based Insulators: Manufacturing Process and Thermal Potential Assessment," Materials, vol. 17, no. 11, 2024, doi: 10.3390/ma17112589. [Google Scholar]
  • A. Silva, F. Gaspar, and A. Bakatovich, "Composite Materials of Rice Husk and Reed Fibers for Thermal Insulation Plates Using Sodium Silicate as a Binder," Sustainability, vol. 15, no. 14, 2023, doi: 10.3390/su151411273. [Google Scholar]
  • A. M. Pascual, M. L. Romero, E. Serra, J. C. Guerrero, and R. Perez, "Sustainable insulation panel for buildings made of rice husks and posidonia," Constr Build Mater, vol. 445, p. 137983, 2024, doi: https://doi.org/10.1016/j.conbuildmat.2024.137983. [Google Scholar]
  • A. A. Teyabeen, N. B. Elhatmi, A. A. Essnid, and A. E. Jwaid, "Parameters Estimation of Solar PV Modules Based on Single-Diode Model," in 2020 11th International Renewable Energy Congress (IREC), 2020, pp. 1–6. doi: 10.1109/IREC48820.2020.9310365. [Google Scholar]
  • M. Knausz et al., "Thermal expansion behavior of solar cell encapsulation materials," Polym Test, vol. 44, pp. 160–167, 2015, doi: https://doi.org/10.1016/j.polymertesting.2015.04.009. [Google Scholar]
  • R. Cavieres, R. Barraza, D. Estay, J. Bilbao, and P. Valdivia-Lefort, "Automatic soiling and partial shading assessment on PV modules through RGB images analysis," Appl Energy, vol. 306, Jan. 2022, doi: 10.1016/j.apenergy.2021.117964. [Google Scholar]
  • S. N. Razali et al., "Performance enhancement of photovoltaic modules with passive cooling multidirectional tapered fin heat sinks (MTFHS)," Case Studies in Thermal Engineering, vol. 50, p. 103400, 2023, doi: https://doi.org/10.1016/jxsite.2023.103400. [Google Scholar]
  • M. J. Afroni, E. S. Wirateruna, and O. Melfazen, "An Experimental Study of Partial Shading Effects on the P-V Characteristic Curve," in 2022 11th Electrical Power, Electronics, Communications, Controls and Informatics Seminar (EECCIS), 2022, pp. 22–27. doi: 10.1109/EECCIS54468.2022.9902950. [Google Scholar]
  • E. S. Wirateruna, M. Ashari, and D. C. Riawan, "Estimation and Assessment of Partial Shading Patterns in Large PV Farms Using ANN Algorithm," IEEE Access, vol. 13, pp. 139189–139202, 2025, doi: 10.1109/ACCESS.2025.3596268. [Google Scholar]
  • M. J. Afroni and E. S. Wirateruna, "4 Section method for MPPT optimization in Solar Panel Experiments under PSC v221023," in 2023 International Conference on Smart-Green Technology in Electrical and Information Systems (ICSGTEIS), 2023, pp. 172–177. doi: 10.1109/ICSGTEIS60500.2023.10424047. [Google Scholar]
  • H. Al Mahdi, P. G. Leahy, M. Alghoul, and A. P. Morrison, "A Review of Photovoltaic Module Failure and Degradation Mechanisms: Causes and Detection Techniques," Solar, vol. 4, no. 1, pp. 43–82, 2024, doi: 10.3390/solar4010003. [CrossRef] [Google Scholar]
  • A. Alhejab, M. Abbasi, and S. Ahmed, "A Single Voltage Sensor Bypass Switch-Based Photovoltaic Fault Localization," IEEE J Photovolt, pp. 1–11, 2025, doi: 10.1109/JPHOTOV.2025.3530001. [Google Scholar]
  • P. Murugesan, P. Winston David, P. Murugesan, and N. Kalyani Solaisamy, "One-step adaptive reconfiguration technique for partial shaded photovoltaic array," Solar Energy, vol. 263, p. 111949, 2023, doi: https://doi.org/10.1016/j.solener.2023.111949. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.