Open Access
Issue
BIO Web Conf.
Volume 212, 2026
1st International Conference on Environment, Energy, and Materials for Sustainable Development (IC2EM-SDT’25)
Article Number 01007
Number of page(s) 7
DOI https://doi.org/10.1051/bioconf/202621201007
Published online 23 January 2026
  • A. M. Omer, “Energy, environment and sustainable development,” Renewable and Sustainable Energy Reviews, vol. 12, no. 9, pp. 2265–2300, 2008. https://doi.org/10.1016/j.rser.2007.05.001 [CrossRef] [Google Scholar]
  • Moroccan Agency for Energy Efficiency (AMEE), National Energy Efficiency Strategy and Building Sector Indicators, Rabat, Morocco, 2023. [Google Scholar]
  • Ministry of National Territory Planning, Urban Planning, Housing and City Policy, Thermal Regulation of Building Construction in Morocco (TRBM), Decree No. 2-13-874, Morocco, 2014. [Google Scholar]
  • A. B. O. Kwame, N. V. Troy, and N. Hamidreza, “A multi-facet retrofit approach to improve energy efficiency of existing single-family residential buildings in hot-humid climate zones,” Energies, vol. 13, no. 5, 2020. https://doi.org/10.3390/en13051178 [Google Scholar]
  • F. Del Ama Gonzalo, B. Moreno Santamaría, and M. J. Montero Burgos, “Assessment of building energy simulation tools to predict heating and cooling energy consumption at early design stages,” Sustainability, vol. 15, no. 3, 1920, 2023. https://doi.org/10.3390/su15031920 [Google Scholar]
  • S.-G. Yong, J. Kim, and H. Cho, “Impacts of building envelope design factors upon energy loads and their optimization in U.S. standard climate zones using experimental design,” Energy and Buildings, vol. 141, pp. 1–15, 2017. https://doi.org/10.1016/j.enbuild.2017.02.032 [Google Scholar]
  • F. Ascione, N. Bianco, G. M. Mauro, and D. F. Napolitano, “Building envelope design: Multi-objective optimization to minimize energy consumption, global cost and thermal discomfort—Application to different Italian climatic zones,” Energy, vol. 174, pp. 359–374, 2019. https://doi.org/10.1016/j.energy.2019.02.182 [Google Scholar]
  • G. Krauss, B. Lips, J. Virgone, and E. Blanco, “TRNSYS modeling of a positive energy solar house,” Conference Proceedings, 2006. [Google Scholar]
  • A. K. Nayak and A. Hagishima, “Modification of TRNSYS for modeling nonlinear heat and moisture transfer through TRNSYS–MATLAB integration,” E3S Web of Conferences, 2020. [Google Scholar]
  • M. Asim, J. Dewsbury, and S. Kanan, “TRNSYS simulation of a solar cooling system for hot climate conditions,” Energy Procedia, vol. 91, pp. 702–706, 2016. [Google Scholar]
  • TRNSYS 16 Manual: Multizone Building Modeling with Type 56 and TRNBuild, Solar Energy Laboratory, University of Wisconsin–Madison. [Google Scholar]
  • H. Farzaneh, L. Malehmirchegini, A. Bejan, T. Afolabi, A. Mulumba, and P. P. Daka, “Artificial intelligence evolution in smart buildings for energy efficiency,” Energies, 2021. [Google Scholar]
  • A. Atifi, L. Balli, M. Hlimi, K. El Bikri, and B. Hamri, “Comparative study of bipolar plate materials on contact resistance and heat transfer in a PEMFC stack,” Journal of Advanced Research in Applied Sciences and Engineering Technology, vol. 32, no. 1, pp. 343–358, 2023. [Google Scholar]
  • O. J. Imafidon and D. S.-K. Ting, “Dynamic modelling of building envelopes on energy usage,” Proceedings of Thriving Through Climate Change & Pandemic, Windsor, Canada, 2021. [Google Scholar]
  • R. Guechchati, M. A. Moussaoui, A. Mezrhab, and A. Mezrhab, “Simulation de l’effet de l’isolation thermique des bâtiments : Cas du centre psychopédagogique SAFAA à Oujda,” Revue des Énergies Renouvelables, vol. 13, no. 2, pp. 223–232, 2010. [Google Scholar]
  • O. Mansouri, F. Bourbia, and R. Belarbi, “Influence of envelope reflectivity on building energy demand and thermal comfort,” 2018. [Google Scholar]
  • A. Alami, M. Bahi, and R. Belarbi, “Recent advances in building energy simulation and thermal comfort assessment in cold and temperate climates: A review,” Energy and Buildings, vol. 302, 2024, 113822. [Google Scholar]
  • M. K. Al-Saadi, H. Rezaei, and F. Ascione, “Dynamic simulation-based optimization of building envelopes for energy efficiency and thermal comfort,” Applied Energy, vol. 355, 2024, 121983. [Google Scholar]
  • S. Benhamou, A. Mezrhab, and R. Guechchati, “Thermal performance assessment of residential buildings in cold Mediterranean climates using TRNSYS,” Sustainability, vol. 16, no. 2, 2024, 891. https://doi.org/10.3390/su16020891 [Google Scholar]
  • L. Zhang, Y. Wang, and J. Liu, “Recent developments in insulation materials and thickness optimization for low-energy buildings,” Renewable and Sustainable Energy Reviews, vol. 190, 2025, 114091. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.