EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 212 (2026) BIO Web Conf., 212 (2026) 01022 References
Open Access
Issue
BIO Web Conf.
Volume 212, 2026
1st International Conference on Environment, Energy, and Materials for Sustainable Development (IC2EM-SDT’25)
Article Number 01022
Number of page(s) 6
DOI https://doi.org/10.1051/bioconf/202621201022
Published online 23 January 2026
  • B. Nan, Y. Qiao, J. Leng, and Y. Bai, “Advancing Structural Reinforcement in 3D-Printed Concrete: Current Methods, Challenges, and Innovations,” Materials 2025, Vol. 18, Page 252, vol. 18, no. 2, p. 252, Jan. 2025, doi: 10.3390/MA18020252. [Google Scholar]
  • O. Oguntola and S. Simske, “Continuous Assessment of the Environmental Impact and Economic Viability of Decarbonization Improvements in Cement Production,” Resources 2023, Vol. 12, Page 95, vol. 12, no. 8, p. 95, Aug. 2023, doi: 10.3390/RESOURCES12080095. [Google Scholar]
  • I. J. Okeke, D. Kamath, S. U. Nimbalkar, and J. Cresko, “The Role of Low-Carbon Fuels and Carbon Capture in Decarbonizing the U.S. Clinker Manufacturing for Cement Production: CO2 Emissions Reduction Potentials,” Energies 2024, Vol. 17, Page 5233, vol. 17, no. 20, p. 5233, Oct. 2024, doi: 10.3390/EN17205233. [Google Scholar]
  • J. Chen, “Review of 3D Printed Concrete: Mix Design,” Applied and Computational Engineering, vol. 127, no. 1, pp. 24–29, Jan. 2025, doi: 10.54254/2755-2721/2025.20060. [Google Scholar]
  • A. Perrot et al., “Snapshot on 3D printing with alternative binders and materials: Earth, geopolymers, gypsum and low carbon concrete,” Cem Concr Res, vol. 185, p. 107651, Nov. 2024, doi: 10.1016/J.CEMCONRES.2024.107651. [Google Scholar]
  • N. Hanratty, M. Khan, and C. McNally, “The Role of Different Clay Types in Achieving Low-Carbon 3D Printed Concretes,” Buildings 2024, Vol. 14, Page 2194, vol. 14, no. 7, p. 2194, Jul. 2024, doi: 10.3390/BUILDINGS14072194. [Google Scholar]
  • T. Hanein et al., “Clay calcination technology: state-of-the-art review by the RILEM TC 282-CCL,” Materials and Structures 2023 55:1, vol. 55, no. 1, pp. 1–29, Dec. 2021, doi: 10.1617/S11527-021-01807-6. [Google Scholar]
  • Y. Chen, S. He, Y. Zhang, Z. Wan, O. Çopuroğlu, and E. Schlangen, “3D printing of calcined clay-limestone-based cementitious materials,” Cem Concr Res, vol. 149, p. 106553, Nov. 2021, doi: 10.1016/J.CEMCONRES.2021.106553. [Google Scholar]
  • M. D. Sheikh, T. Jamil, T. Ayub, A. U. R. Khan, S. M. Bilal, and C. Hu, “Comparative Study on LC3-50 with OPC Concrete Using Raw Materials from Pakistan,” Advances in Materials Science and Engineering, vol. 2023, no. 1, p. 5503670, Jan. 2023, doi: 10.1155/2023/5503670. [Google Scholar]
  • J. Zhang, Q. Luo, and X. Zhang, “Exploring the influence of calcined clay grade on the rheological dynamics of LC3 mortar,” Constr Build Mater, vol. 444, p. 137852, Sep. 2024, doi: 10.1016/J.CONBUILDMAT.2024.137852. [Google Scholar]
  • K. Vance, A. Kumar, G. Sant, and N. Neithalath, “The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash,” Cem Concr Res, vol. 52, pp. 196–207, Oct. 2013, doi: 10.1016/J.CEMCONRES.2013.07.007. [Google Scholar]
  • W. Jin, J. F. Caron, and C. M. Ouellet-Plamondon, “Minimizing the carbon footprint of 3D printing concrete: Leveraging parametric LCA and neural networks through multiobjective optimization,” Cem Concr Compos, vol. 157, p. 105853, Mar. 2025, doi: 10.1016/J.CEMCONCOMP.2024.105853. [Google Scholar]
  • “Guide for Approximation of Optimum SO3 in Hydraulic Cement,” Jun. 2020, doi: 10.1520/C0563-20. [Google Scholar]
  • H. Minard, S. Garrault, L. Regnaud, and A. Nonat, “Mechanisms and parameters controlling the tricalcium aluminate reactivity in the presence of gypsum,” Cem Concr Res, vol. 37, no. 10, pp. 1418–1426, Oct. 2007, doi: 10.1016/J.CEMCONRES.2007.06.001. [Google Scholar]
  • I. Bhandari, R. Kumar, A. Sofi, and N. S. Nighot, “A systematic study on sustainable low carbon cement – Superplasticizer interaction: Fresh, mechanical, microstructural and durability characteristics,” Heliyon, vol. 9, no. 9, p. e19176, Sep. 2023, doi: 10.1016/J.HELIYON.2023.E19176. [CrossRef] [Google Scholar]
  • W. Jin, C. Roux, C. Ouellet-Plamondon, and J. F. Caron, “Life cycle assessment of limestone calcined clay concrete: Potential for low-carbon 3D printing,” Sustainable Materials and Technologies, vol. 41, p. e01119, Sep. 2024, doi: 10.1016/J.SUSMAT.2024.E01119. [Google Scholar]
  • Y. A. Al-Noaimat et al., “3D printing of limestone-calcined clay cement: A review of its potential implementation in the construction industry,” Results in Engineering, vol. 18, p. 101115, Jun. 2023, doi: 10.1016/J.RINENG.2023.101115. [Google Scholar]
  • J. Shao, S. Guo, and H. Wang, “A Review of the Performance, Sustainable Applications, and Research Challenges of Limestone-Calcined Clay-Cement (LC3) Systems,” Coatings 2025, Vol. 15, Page 611, vol. 15, no. 5, p. 611, May 2025, doi: 10.3390/COATINGS15050611. [Google Scholar]
  • T. R. Muzenda, P. Hou, S. Kawashima, T. Sui, and X. Cheng, “The role of limestone and calcined clay on the rheological properties of LC3,” Cem Concr Compos, vol. 107, p. 103516, Mar. 2020, doi: 10.1016/J.CEMCONCOMP.2020.103516. [Google Scholar]
  • Y. Chen et al., “Rheology control of limestone calcined clay cement pastes by modifying the content of fine-grained metakaolin,” J Sustain Cem Based Mater, vol. 12, no. 9, pp. 1126–1140, 2023, doi: 10.1080/21650373.2023.2169965;JOURNAL:JOURNAL:TSCM20;PAGE:STRING:ARTICL E/CHAPTER. [Google Scholar]
  • H. ; Li, J. ; Wei, K. H. Khayat, H. Li, J. Wei, and K. H. Khayat, “3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials: From Mixture Design to Printability Evaluation,” Buildings 2024, Vol. 14, Page 1666, vol. 14, no. 6, p. 1666, Jun. 2024, doi: 10.3390/BUILDINGS14061666. [Google Scholar]
  • K. H. Khayat, “Viscosity-enhancing admixtures for cement-based materials — An overview,” Cem Concr Compos, vol. 20, no. 2–3, pp. 171–188, Jan. 1998, doi: 10.1016/S0958-9465(98)80006-1. [Google Scholar]
  • I. Navarrete, Y. Kurama, N. Escalona, and M. Lopez, “Impact of physical and physicochemical properties of supplementary cementitious materials on structural build-up of cement-based pastes,” Cem Concr Res, vol. 130, p. 105994, Apr. 2020, doi: 10.1016/J.CEMCONRES.2020.105994. [Google Scholar]
  • Y. Chen, C. Romero Rodriguez, Z. Li, B. Chen, O. Çopuroğlu, and E. Schlangen, “Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing,” Cem Concr Compos, vol. 114, Nov. 2020, doi: 10.1016/J.CEMCONCOMP.2020.103708. [Google Scholar]
  • Y. Zhao et al., “Development of low-carbon materials from GGBS and clay brick powder for 3D concrete printing,” Constr Build Mater, vol. 383, p. 131232, Jun. 2023, doi: 10.1016/J.CONBUILDMAT.2023.131232. [Google Scholar]
  • W. Zhou, Y. Zhang, L. Ma, and V. C. Li, “Influence of printing parameters on 3D printing engineered cementitious composites (3DP-ECC),” Cem Concr Compos, vol. 130, p. 104562, Jul. 2022, doi: 10.1016/J.CEMCONCOMP.2022.104562. [Google Scholar]
  • Y. A. Al-Noaimat et al., “Optimising limestone calcined clay cement containing excavated low-grade waste clay for 3D printing applications,” Clean Eng Technol, vol. 27, p. 100991, Jul. 2025, doi: 10.1016/J.CLET.2025.100991. [Google Scholar]
  • Y. A. Al-Noaimat, M. Chougan, E. El-Seidy, A. Albar, and S. H. Ghaffar, “Valorising excavated low-grade waste clay in limestone calcined clay cement system for 3D printing applications,” Journal of Building Engineering, vol. 106, p. 112634, Jul. 2025, doi: 10.1016/J.JOBE.2025.112634. [Google Scholar]
  • Y. Maierdan, D. Zhao, P. H. Chokshi, M. Garmonina, and S. Kawashima, “Rheology, 3D printing, and particle interactions of xanthan gum-clay binder for earth concrete,” Cem Concr Res, vol. 182, p. 107551, Aug. 2024, doi: 10.1016/J.CEMCONRES.2024.107551. [Google Scholar]
  • J. Christ, A. Perrot, L. M. Ottosen, and H. Koss, “Rheological characterization of temperature-sensitive biopolymer-bound 3D printing concrete,” Constr Build Mater, vol. 411, p. 134337, Jan. 2024, doi: 10.1016/J.CONBUILDMAT.2023.134337. [Google Scholar]
  • Y. Cao, L. Shen, A. Mukherjee, A. Abbas, and D. Dias-da-Costa, “Improvement of the interlayer bonding strength in a 3D-printed mortar with biocement sprayed into interlayer surfaces,” Virtual Phys Prototyp, vol. 20, no. 1, 2025, doi: 10.1080/17452759.2025.2521104. [Google Scholar]
  • C. Qian, T. Zheng, X. Zhang, and Y. Su, “Application of microbial self-healing concrete: Case study,” Constr Build Mater, vol. 290, Jul. 2021, doi: 10.1016/J.CONBUILDMAT.2021.123226. [Google Scholar]
  • K. A. Ibrahim, G. P. A. G. van Zijl, and A. J. Babafemi, “Influence of limestone calcined clay cement on properties of 3D printed concrete for sustainable construction,” Journal of Building Engineering, vol. 69, p. 106186, Jun. 2023, doi: 10.1016/J.JOBE.2023.106186. [Google Scholar]
  • V. N. Nerella, S. Hempel, and V. Mechtcherine, “Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing,” Constr Build Mater, vol. 205, pp. 586–601, Apr. 2019, doi: 10.1016/J.CONBUILDMAT.2019.01.235. [CrossRef] [Google Scholar]
  • A. R. Arunothayan, B. Nematollahi, R. Ranade, S. H. Bong, J. G. Sanjayan, and K. H. Khayat, “Fiber orientation effects on ultra-high performance concrete formed by 3D printing,” Cem Concr Res, vol. 143, p. 106384, May 2021, doi: 10.1016/J.CEMCONRES.2021.106384. [Google Scholar]
  • Y. Chen, H. Rahmani, E. Schlangen, and O. Çopuroğlu, “An approach to develop set-on-demand 3D printable limestone-calcined clay-based cementitious materials using calcium nitrate,” Cem Concr Compos, vol. 145, p. 105373, Jan. 2024, doi: 10.1016/J.CEMCONCOMP.2023.105373. [Google Scholar]
  • T. E. Ndarowa, J. Mahachi, and Bolanle. D. Ikotun, “A Review of Optimization of Limestone and Calcined Clay Cement (LC3) Concrete Mixtures for 3d Printing,” Proceedings of the 9th International Conference on Civil, Structural and Transportation Engineering (ICCSTE 2024), Jun. 2024, doi: 10.11159/ICCSTE24.191. [Google Scholar]
  • P. Haverkamp, M. Traverso, A. H. Ahmed, M. Liebscher, and V. Mechtcherine, “Evaluating the Environmental Impacts and Social Risks of Limestone Calcined Clay Cement (LC3) Mortars,” Sustainability (Switzerland), vol. 17, no. 18, p. 8364, Sep. 2025, doi: 10.3390/SU17188364/S1. [Google Scholar]
  • Y. Yu, M. Yang, C. Wan, and L. Lin, “Mechanical, workability, economic and environmental properties of concrete with limestone calcined clay cement and recycled aggregates,” Scientific Reports 2025 15:1, vol. 15, no. 1, pp. 1–15, Apr. 2025, doi: 10.1038/s41598-025-97539-6. [Google Scholar]
  • A. Baktheer and M. Classen, “A review of recent trends and challenges in numerical modeling of the anisotropic behavior of hardened 3D printed concrete,” Addit Manuf, vol. 89, p. 104309, Jun. 2024, doi: 10.1016/J.ADDMA.2024.104309. [Google Scholar]
  • W. Jin, C. Roux, C. Ouellet-Plamondon, and J. F. Caron, “Life cycle assessment of limestone calcined clay concrete: Potential for low-carbon 3D printing,” Sustainable Materials and Technologies, vol. 41, p. e01119, Sep. 2024, doi: 10.1016/J.SUSMAT.2024.E01119. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.