Optimization of Cassava Starch–CMC–Glycerol Formulations for Enhanced Water Resistance of Biofilms

Open Access

Issue		BIO Web Conf. Volume 223, 2026 The 3^rd International Conference on Food Technology and Nutrition (ICFTN 2025)


Article Number		01006
Number of page(s)		8
Section		Food Technology and Nutrition
DOI		https://doi.org/10.1051/bioconf/202622301006
Published online		25 February 2026

R. Verma, K.S. Vinoda, M. Papireddy, and A.N.S. Gowda, “Toxic pollutants from plastic waste- a Review,” Procedia Environ. Sci., vol. 35, pp. 701–708, 2016, doi: 10.1016/j.proenv.2016.07.069 [CrossRef] [Google Scholar]
P.G.C.N.T. Pilapitiya and A.S. Ratnayake, “The world of plastic waste: a review,” Cleaner Materials, vol. 11, p. 100220, Mar. 2024, doi: 10.1016/j.clema.2024.100220 [Google Scholar]
IUCN, “Marine plastic pollution,” Switzerland, Nov. 2021. Accessed: Feb. 02, 2026. [Online]. Available: www.iucn.org/theme/marine-and-polar/our-work/close- plastictap-programme/reports [Google Scholar]
Y. Tang et al., “Sustainable biobased composites: from raw materials to recycling,” Compos. B Eng., vol. 311, p. 113188, Feb. 2026, doi: 10.1016/j.compositesb.2025.113188 [Google Scholar]
J.P. Hidayat, M.D. Pusfitasari, R.A.D. Gunawan, and R. Fahlevi, “Pemanfaatan sumber daya lokal biji karet sebagai amplifikasi protein es krim mellorine dengan pengemulsi CMC,” Agrointek, vol. 19, no. 3. pp. 540–553, 2025, doi: 10.21107/agrointek.v19i3.25663 [Google Scholar]
R. Ramakrishnan, J.T. Kim, S. Roy, and A. Jayakumar, “Recent advances in carboxymethyl cellulose-based active and intelligent packaging materials: a comprehensive review,” Int. J. Biol. Macromol., vol. 259, p. 129194, Feb. 2024, doi: 10.1016/j.ijbiomac.2023.129194 [Google Scholar]
Y.W. Tiong, C.L. Yap, S. Gan, and W.S.P. Yap, “Kinetic and thermodynamic studies of oil palm mesocarp fiber cellulose conversion to levulinic acid and upgrading to ethyl levulinate via indium trichloride-ionic liquids,” Renew. Energy, vol. 146, pp. 932–943, Feb. 2020, doi: 10.1016/j.renene.2019.07.024 [Google Scholar]
R. Affanti, Zulferiyenni, F. Nurainy, and S. Hidayati, “Characteristics of biodegradable film based on cellulose fiber hyacinth (eichhornia crassipes (mart.) solms) with addition of glycerol and carboxy methyl cellulose (cmc),” Jurnal Agroindustri Berkelanjutan, vol. 3, no. 1. pp. 29–40, 2024. [Google Scholar]
G. Giubertoni et al., “Hydrogen bonds under stress: strain-Induced structural changes in polyurethane revealed by rheological two-dimensional infrared spectroscopy,” Journal of Physical Chemistry Letters, vol. 14, no. 4. pp. 940–946, Feb. 2023, doi: 10.1021/acs.jpclett.2c03109 [Google Scholar]
F. Fahrullah and M. Ervandi, “Karakterisasi mikrostruktur film whey dengan penambahan konjac glucomannan,” Agrointek : Jurnal Teknologi Industri Pertanian, vol. 16, no. 3. pp. 396–404, Aug. 2022, doi: 10.21107/agrointek.v16i3.12303 [Google Scholar]
Y. Zhang et al., “In vitro hydrolysis and estimated glycemic index of jackfruit seed starch prepared by improved extrusion cooking technology,” Int. J. Biol. Macromol., vol. 121, pp. 1109–1117, 2019, doi: 10.1016/j.ijbiomac.2018.10.075 [Google Scholar]
C. Cui, N. Ji, Y. Wang, L. Xiong, and Q. Sun, “Bioactive and intelligent starch-based films: A review,” Trends Food Sci. Technol., vol. 116, pp. 854–869, 2021, doi: 10.1016/j.tifs.2021.08.024 [Google Scholar]
A.A. Maan, Z.F. Reiad Ahmed, M.K. Iqbal Khan, A. Riaz, and A. Nazir, “Aloe vera gel, an excellent base material for edible films and coatings,” Oct. 01, 2021, Elsevier Ltd. doi: 10.1016/j.tifs.2021.07.035 [Google Scholar]
B.F. Bergel, L. Leite Araujo, A.L. dos Santos da Silva, and R.M. Campomanes Santana, “Effects of silylated starch structure on hydrophobization and mechanical properties of thermoplastic starch foams made from potato starch,” Carbohydr. Polym., vol. 241, p. 116274, Aug. 2020, doi: 10.1016/j.carbpol.2020.116274 [Google Scholar]
I.A. Brion-Espinoza, M. Iñiguez-Moreno, J.A. Ragazzo-Sánchez, J.C. Barros-Castillo, C. Calderón-Chiu, and M. Calderón-Santoyo, “Edible pectin film added with peptides from jackfruit leaves obtained by high-hydrostatic pressure and pepsin hydrolysis,” Food Chem. X, vol. 12, p. 100170, 2021, doi: 10.1016/j.fochx.2021.100170 [Google Scholar]
M. Ramos-Andrés, L. Hu, H. Grénman, C. Xu, and J. García-Serna, “Upcycling of carrot waste into pectin-arabinogalactan and lignin-cellulose films via hydrothermal treatment, ultrafiltration/diafiltration, and casting,” J. Environ. Chem. Eng., vol. 12, p. 112645, 2024, doi: 10.1016/j.jece.2024.112645 [Google Scholar]
J.P. Hidayat, H.A. Romadhona, N. Sholihah, and S. Munfarida, “Aloe vera gel-based edible coating characterization by onion powder fortification method as an antimicrobial,” Agrointek, vol. 17, no. 3. pp. 493–501, 2023, doi: 10.21107/agrointek.v17i3.14607 [Google Scholar]
D. Pratap Singh and G. Packirisamy, “Biopolymer based edible coating for enhancing the shelf life of horticulture products,” Food Chemistry: Molecular Sciences, vol. 4, Jul. 2022, doi: 10.1016/j.fochms.2022.100085 [Google Scholar]
R. Dewi, Rahmi, and Nasrun, “Perbaikan sifat mekanik dan laju transmisi uap air edible film bioplastik menggunakan minyak sawit dan plasticizer gliserol berbasis pati sagu,” Jurnal Teknologi Kimia Unimal, vol. 10, no. 1. pp. 61–77, May 2021, Accessed: Feb. 02, 2026. [Online]. Available: https://ojs.unimal.ac.id/jtk/index [Google Scholar]
J.P. Hidayat, S. Munfarida, and A. Hariyadi, “Modified ganyong (Canna edulis Kerr.) starch prospective as wheat flour alternative,” Food Res., vol. 8, pp. 11–17, 2024, doi: 10.26656/fr.2017.8(S1).2 [Google Scholar]
M.L. Sanyang, S.M. Sapuan, M. Jawaid, M.R. Ishak, and J. Sahari, “Effect of sugar palm-derived cellulose reinforcement on the mechanical and water barrier properties of sugar palm starch biocomposite films,” Bioresources, vol. 11, no. 2. pp. 4134–4145, 2016. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.