| Issue |
BIO Web Conf.
Volume 17, 2020
International Scientific-Practical Conference “Agriculture and Food Security: Technology, Innovation, Markets, Human Resources” (FIES 2019)
|
|
|---|---|---|
| Article Number | 00239 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/bioconf/20201700239 | |
| Published online | 28 February 2020 | |
Determining the residual resource of the hammer crushers’ rotor bearings
1
Kazan State Agrarian University, 420015 Kazan, Russia
2
Kazan National Research Technical University named after A.N. Tupolev, 420111 Kazan, Russia
* Corresponding author: n-adigamov@rambler.ru
The practice of operating machinery and equipment that are used in animal husbandry and in the processing of its products has shown low reliability of feed crushers. As of 01.01.2019, in the agricultural enterprises of the Republic of Tatarstan there are about 1200 machines for grinding feed, of which 800 pcs. are hammer crushers. Most of these crushers have a service life of 10 to 13 years and are objects with low reliability. Mostly emergency stops occur due to the destruction of the rotor bearings. In the event of a sudden failure, unplanned repairs and a decrease in production efficiency occur. At the Department of Operation and Repair of Machines of Kazan State Agrarian University, research was carried out and a scientific result was obtained, which was implemented in the adapter to the vibrometer to determine the residual life of rolling bearings. Input data for this device were obtained during operational research and further analysis of the data.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.