Study and Evaluation a New Predictive Control Method for Speed and Stator Current Control of Induction Motor

¹ Northern Technical College, Technical College, Kirkuk, Iraq
² Tikrit University, Al-Shirqat Engineering College, Iraq

^* Corresponding Author: ganimdiab@yahoo.com

Abstract

It is clear that modern industries rely heavily on electric motors, especially induction motors. These motors convert electrical energy into mechanical energy. The distinction in the performance of the induction motor lies in that it is powerful when exposed to various operational and environmental variables, and it is also inexpensive. However, there are many traditional disadvantages that appear during the operation of the induction motor in its non-linear mechanical properties in addition to the difficulty in regulating the speed of the motor. In this paper , we present a new control method for controlling the stator current and speed of induction motor based on current control with speed control technique. The present model is based on conventional predictive controller development with a structure which is similar to rotor control and the direct torque control .It has double loops and both loops will use the prediction power. The inner loop controls the stator current based on Finite Control Set - Model Predictive Control (FCS-MPC) and the outer loop controls the speed to maximize the dynamic response of the loop. The MATLAB software has been used to implement the controller circuit. The obtained simulation results indicates that the presented control method has comparable performance to conventional controllers with some reduction in the overshoot and fast response interval.