EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 97 (2024) BIO Web Conf., 97 (2024) 00109 References
Open Access
Issue
BIO Web Conf.
Volume 97, 2024
Fifth International Scientific Conference of Alkafeel University (ISCKU 2024)
Article Number 00109
Number of page(s) 7
DOI https://doi.org/10.1051/bioconf/20249700109
Published online 05 April 2024
  • S.U. Raj and Tintu George, T., “Speed sensor less induction motor drive with PCC in conveyor systems,” in Conference on Emerging Devices and Smart Systems (ICEDSS), 2016, pp. 97–112, DOI: 10.1109/ICEDSS.2016.7587796. [CrossRef] [Google Scholar]
  • Ghanim Thiab Hasan, Kamil Jadu Ali, Ali Hlal Mutlaq “Design of current controlled instrumental amplifier by using complementary metallic oxide semiconductor technology” Indonesian Journal of Electrical Engineering and Computer Science. Vol. 29, No. 2, February 2023, pp. 652–657. DOI: 10.11591/ijeecs.v29.i2.pp652-657-652. [CrossRef] [Google Scholar]
  • J. Holtz, “Sensorless control of induction motor drives,” in Proceedings of the IEEE, vol. 90, no. 8, pp. 1359–1394, 2002, doi: 10.1109/JPROC.2002.800726. [CrossRef] [Google Scholar]
  • G.T. Hasan, A.H. Mutlaq, and K.J. Ali, “Comparative evaluation of SiC/GaN “MOSFT” transistors under different switching conditions,” Bulletin of Electrical Engineering and Informatics, vol. 11, no. 2, pp. 681–690, April 2022, doi: 10.11591/eei.v11i2.3445. [CrossRef] [Google Scholar]
  • V.T. Ha, L.T. Tan, N.D. Nam, N.P. Quang, “Backstopping control of two-mass system using induction motor drive fed by voltage source inverter with ideal control performance of stator current,” International Journal of Power Electronics and Drive System (IJPEDS), vol. 10, no. 2, 2019, pp. 720–730, doi: 10.11591/ijpeds.v10.i2.pp720-730. [CrossRef] [Google Scholar]
  • G.J. Rogers, J. Di Manno, and R.T.H. Alden, “An aggregate induction motor model for industrial plants,” IEEE Transactions on Power Apparatus and Systems, vol. PAS-103, no. 4, pp. 683–690, 1984, doi: 10.1109/TPAS.1984.318313. [CrossRef] [Google Scholar]
  • V.T. Ha, N.T. Lam, V.T. Ha, and V.Q. Vinh, “Advanced control structures for induction motors with ideal current loop response using field- oriented control,” International Journal of Power Electronics and Drive System (IJPEDS), vol. 10, no. 4, 2019, pp. 1758–1771, doi: 10.11591/ijpeds.v10.i4.pp1758-1771 [Google Scholar]
  • S.A. Asgari, M. Jannati, T. Sutikno, and N.R.N. Idris, “Vector control of three-phase induction motor with twostator phases open- circui,” International Journal of Power Electronics and Drive System (IJPEDS), vol. 6, no. 2, pp. 282–292, 2015, doi: 10.11591/ijpeds.v6.i2.pp282-292. [CrossRef] [Google Scholar]
  • N.P. Quang, J. Dittrich, “Vector control of three-phase AC machines-System development in the practice 2nd edition,” Springer- Verleg Berlin Heidelberg, 2015. [CrossRef] [Google Scholar]
  • M. Salo and H. Tuusa, “Vector-controlled PWM current-source-inverter-fed induction motor drive with a new stator current control method,” in IEEE Transactions on Industrial Electronics, vol. 52, no. 2, pp. 523–531, 2005, doi: 10.1109/TIE.2005.844243. [CrossRef] [Google Scholar]
  • J. Rodriguez et al., “Predictive current control of a voltage source inverter,” in IEEE Transactions on Industrial Electronics, vol. 54, no. 1, pp. 495–503, Feb. 2007, doi: 10.1109/TIE.2006.888802. [CrossRef] [Google Scholar]
  • S.M. Muslem Uddin, S. Mekhilef, M. Rivera and J. Rodriguez, “A FCS-MPC of an induction motor fed by indirect matrix converter with unity power factor control,” in Conference on Industrial Electronics and Applications (ICIEA), 2013, pp. 1769–1774, doi: 10.1109/ICIEA.2013.6566655. [Google Scholar]
  • K. Bándy and P. Stumpf, “Model predictive torque control for multilevel inverter fed induction machines using sorting networks,” IEEE Access, vol. 9, pp. 13800–13813, 2021, doi: 10.1109/ACCESS.2021.3052129. [CrossRef] [Google Scholar]
  • M. Rivera, V. Yaramasu, A. Llor, J. Rodriguez, B. Wu and M. Fadel, “Digital predictive current control of a three-phase four-leg inverter,” IEEE Transactions on Industrial Electronics, vol. 60, no. 11, pp. 4903–4912, 2013, doi: 10.1109/TIE.2012.2219837. [CrossRef] [Google Scholar]
  • M. Parvez, S. Mekhilef, N.M.L. Tan, and H. Akagi, “Model predictive control of a bidirectional AC-DC converter for V2G and G2V applications in electric vehicle battery charger,” in IEEE Transportation Electrification Conference and Expo (ITEC), 2014, pp. 1–6, doi: 10.1109/ITEC.2014.6861795. [Google Scholar]
  • J. Beerten, J. Verveckken and J. Driesen, “Predictive direct torque control for flux and torque ripple reduction,” IEEE Transactions on Industrial Electronics, vol. 57, no. 1, pp. 404–412, 2010, doi: 10.1109/TIE.2009.2033487. [CrossRef] [Google Scholar]
  • M. Uddin, S. Mekhilef, M. Mubin, M. Rivera, and J. Rodriguez, “Model predictive torque ripple reduction with weighting factor optimization fed by an indirect matrix converter,” in IEEE Applied Power Electronics Conference and Exposition (APEC), doi: 10.1109/APEC.2019.8722124. [Google Scholar]
  • R.P. Aguilera and D.E. Quevedo, “Predictive control of power converters: designs with guaranteed performance,” in IEEE Transactions on Industrial Informatics, vol. 11, no. 1, pp. 53–63, 2015, doi: 10.1109/TII.2014.2363933. [CrossRef] [Google Scholar]
  • M. Uddin, S. Mekhilef, M. Nakaoka and M. Rivera, “Model predictive control of induction motor with delay time compensation: An experimental assessment,” in IEEE Applied Power Electronics Conference and Exposition (APEC), 2015, pp. 543–548, doi: 10.1109/APEC.2015.7104402. [CrossRef] [Google Scholar]
  • P. Correa, M. Pacas and J. Rodriguez, “Predictive torque control for inverter-fed induction machines,” IEEE Transactions on Industrial Electronics, vol. 54, no. 2, pp. 1073–1079, 2007, doi: 10.1109/TIE.2007.892628. [CrossRef] [Google Scholar]
  • T. Geyer, “Model predictive direct current control: formulation of the stator current bounds and the concept of the switching horizon,” IEEE Industry Applications Magazine, vol. 18, no. 2, pp. 47–59, 2012, doi: 10.1109/MIAS.2011.2175518. [CrossRef] [Google Scholar]
  • M. Abdelrahem, C.M. Hackl, and R. Kennel, “Simplified model predictive current control without mechanical sensors for variable- speed wind energy conversion systems,” Electrical Engineering, vol. 99, no. 1, pp. 367–377, 2017, doi: 10.1007/s00202-016-0433-y. [CrossRef] [Google Scholar]
  • J. Rodriguez, J. Kolar, J. Espinoza, M. Rivera and C. Rojas, “Predictive torque and flux control of an induction machine fed by an indirect matrix converter,” in IEEE International Conference on Industrial Technology, 2010, pp. 1857–1863, doi: 10.1109/ICIT.2010.5472539. [Google Scholar]
  • A.A. Ahmed, B.K. Koh and Y.I. Lee, “A comparison of finite control set and continuous control set model predictive control schemes for speed control of induction motors,” in IEEE Transactions on Industrial Informatics, vol. 14, no. 4, pp. 1334–1346, April 2018, doi: 10.1109/TII.2017.2758393. [CrossRef] [Google Scholar]
  • Vo Thanh Ha, Pham Thi Giang “Control for induction motor drives using predictive model stator currents and speeds control” International Journal of Power Electronics and Drive Systems (IJPEDS). Vol. 13, No. 4, December 2022, pp. 2005–2013. DOI: 10.11591/ijpeds.v13.i4. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.