Issue |
BIO Web Conf.
Volume 105, 2024
IV International Conference on Agricultural Engineering and Green Infrastructure for Sustainable Development (AEGISD-IV 2024)
|
|
---|---|---|
Article Number | 01015 | |
Number of page(s) | 5 | |
Section | Agricultural Machinery and Power Units, Green Energy Systems | |
DOI | https://doi.org/10.1051/bioconf/202410501015 | |
Published online | 26 April 2024 |
Substantiation of the parameters of the double flat disc seeder for directly sowing repeated crops in the soil after wheat crop harvesting in Uzbekistan
1 Scientific-Research Institute of Agricultural Mechanization, Samarkand str. 41, Yangiyul dis., Tashkent reg., Uzbekistan
2 The Center for Testing Varieties of Agricultural Crops under the Ministry of Agriculture of the Republic of Uzbekistan, Buyuk Ipak Yuli str., Tashkent, Uzbekistan
3 Andijan Institute of Agriculture and Agrotechnology, University Street 1, Kuyganyor, Andijan, reg., Uzbekistan
* Corresponding author: abduraxmon_qxmei@mail.ru
The article presents the results of theoretical studies on the basis of the parameters of a seeder equipped with a double flat disk. This sows directly that repeated crops without tilling the soil of wheat-free fields in the soil-climatic conditions of Uzbekistan. In order to ensure the required quality of work of the seeder with a double flat disc, the diameter of its discs should be at least 21.4 cm. The angle of sharpening is 25°. As for the width of the bottom planting bed formed by the coulter discs, it should be at least 15 mm. The height of the meeting point of the coulter discs is at least 8.6 cm, and it was determined that the angle of deviation of the radius connecting it with the center of rotation of the disks should be 78°47′.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.