| Issue |
BIO Web Conf.
Volume 105, 2024
IV International Conference on Agricultural Engineering and Green Infrastructure for Sustainable Development (AEGISD-IV 2024)
|
|
|---|---|---|
| Article Number | 01025 | |
| Number of page(s) | 6 | |
| Section | Agricultural Machinery and Power Units, Green Energy Systems | |
| DOI | https://doi.org/10.1051/bioconf/202410501025 | |
| Published online | 26 April 2024 | |
Determining the depth of immersion of combined machine ridge harvesters and the dimensions of the ridges produced by them
1 Scientific-Research Institute of Agricultural Mechanization, Samarkand str. 41, Yangiyul dis., Tashkent reg., Uzbekistan
2 Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, National Research University, K. Niyazi str. 39, Tashkent, Uzbekistan
* Corresponding author: barlibayev.phd@gmail.com
The article discusses the outcomes of theoretical research focused on determining the optimal depth of immersion for combined machine cultivators used in preparing garden and vine rows for monoculture planting, along with the corresponding dimensions of the cultivators they form. The study specifically addresses the planting of vegetable crops between these rows, with a standard width of 70 cm. Considering the typical growth pattern of these crops in bush form, with heights ranging from 10-15 cm and widths of 33-37 cm at the top, it was concluded that the immersion depth of the combined machine’s bushes should be adjusted within the range of 8.5-14.9 cm to meet agrotechnical requirements effectively.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.