| Issue |
BIO Web Conf.
Volume 105, 2024
IV International Conference on Agricultural Engineering and Green Infrastructure for Sustainable Development (AEGISD-IV 2024)
|
|
|---|---|---|
| Article Number | 05011 | |
| Number of page(s) | 7 | |
| Section | Biotechnology for Sustainable Soil Management, Geotechnical Engineering and Natural Resource Conservation | |
| DOI | https://doi.org/10.1051/bioconf/202410505011 | |
| Published online | 26 April 2024 | |
Investigation of the polymer “AEROTEX” mechanical properties in tension of the samples at different printing temperatures
1 Joint Institute for High Temperatures of the Russian Academy of Sciences (JIHT RAS), Izhorskaya st. 13 Bd.2, Moscow, 125412, Russia
2 Moscow Power Engineering Institute (MPEI), Krasnokazarmennaya 14, build. 1, Moscow, 111250, Russia
* Corresponding author: vendlandl@gmail.com
The article is devoted to an experimental research of the samples’ mechanical properties, when they are stretched along the layers. They are made of the AEROTEX polymer based on foaming material, made at different printing temperatures. The samples are grown on a 3D printer by fused deposition modelling. During the tests, the yield strength, tensile strength, modulus of elasticity and Poisson’s ratio are obtained.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.