Open Access
Issue
BIO Web Conf.
Volume 10, 2018
Contemporary Research Trends in Agricultural Engineering
Article Number 02030
Number of page(s) 7
Section Engineering and Technology
DOI https://doi.org/10.1051/bioconf/20181002030
Published online 26 March 2018
  • Schwarzböck T. et al. (2016), Fuel Processing Technology 153, 101–110 (2016) [CrossRef] [Google Scholar]
  • E. Iacovidou, J. Hahladakis, I. Deans, C. Velis, P. Purnell, Waste Management, http://dx.doi.org/10.1016/j.wasman.2017.07.001, (2017) [Google Scholar]
  • M. Nasrullah, M. Hurme, P. Oinas, J. Hannula, P. Vainikka, Fuel Processing Technology 163 (2017) [Google Scholar]
  • M. Malinowski, Infrastructure and Ecology of Rural Areas, Nr 2/IV/2013, PAN, Oddział w Krakowie, 125–139, (2013) [Google Scholar]
  • Ö. Çepelioǧullar, H. Haykırı-Açma, S. Yaman, Waste Management, 48, 275–284, (2016) [CrossRef] [Google Scholar]
  • Materazzi et al., Fuel 150, 473–485 (2016) [CrossRef] [Google Scholar]
  • C. Bessi, L. Lombardi, R. Meoni, A. Canovai, A. Corti, Waste Management 47 (2016) [Google Scholar]
  • M. Malinowski, Episteme 101-108, 14/2012, ISSN 1895-4421, (2012) [Google Scholar]
  • K. Dziedzic, B. Łapczyńska-Kordon, M. Malinowski, M. Niemiec, J. Sikora, Chemical and Process Engineering, 36 (4), 381-384, (2015) [Google Scholar]
  • C.A. Velis, P.J. Longhurst, G.H. Drew, R. Smith, S.J.T. Pollard, Production and Quality Assurance of Solid Recovered Fuels Using Mechanical—Biological Treatment (MBT) of Waste: A Comprehensive Assessment, Critical Reviews in Environmental Science and Technology, 40:12, 979-1105, DOI: 10.1080/10643380802586980, (2010) [Google Scholar]
  • R. Wasielewski, S. Stelmach, A. Sobolewski, Chemik, 65, 6, 572-579, (2011) [Google Scholar]
  • J. Frączek, K. Słomka-Polonis, K. Mudryk, M. Wróbel, K. Dziedzic, Agricultural Engineering, Vol. 20, No.4, 207-217, (2016) [Google Scholar]
  • Stowarzyszenie Producentów Cementu (SPC). Paliwo alternatywne na bazie sortowanych odpadów komunalnych dla przemysłu cementowego. Kraków, 3. (2008) [Google Scholar]
  • N.P.K. Nielsen, D.J. Gardner, T. Poulsen, C. Felby. Wood Fiber Sci, 41:414, (2009) [Google Scholar]
  • H.J.K. Köser, G. Schmalstieg, W. SiemersFuel, 61:791–8, (1982) [CrossRef] [Google Scholar]
  • J. Frączek, K. Mudryk, Acta Agrophysica, 14(1) (2009) [Google Scholar]
  • A. Yasuhara, Y. Amanoa, T. Shibamoto, Waste Management 30, 1161–1164, (2010) [CrossRef] [Google Scholar]
  • E. Golisz, M. Jaros, M. Kalicka, Technical Sciences 16(4), 333–343, (2013) [Google Scholar]
  • Y. Tulek, J. Agr. Sci. Tech. Vol. 13: 655-664, (2011) [Google Scholar]
  • C. Strumiłło, Inżynieria Chemiczna: Podstawy teorii i techniki suszenia. Wyd. Naukowo-Techniczne, Warszawa, ISBN 83-204-0418-5, (1983) [Google Scholar]
  • F. Kneulle, Suszenie. Arkady, Wyd. Warszawa, (1970) [Google Scholar]
  • J. Frączek J. red., Wyd. PTIR, Krakow 2010, ISBN: 978-83-930818-0-6, (2010) [Google Scholar]
  • B.Dobrzański, L. Mieszalski, ISBN-13: 978-8360489-06-2, (2007) [Google Scholar]
  • O.C.Motta Lima, N.C.Pereira and M.A.L.S.Machado, Brazilian Journal of Chemical Engineering, 17(4-7), 539-548. https://dx.doi.org/10.1590/S0104-66322000000400018, (2000) [CrossRef] [Google Scholar]
  • W. Yu, X. Liu, H.S. Su, Y.J. Zhang, Energy and Power Engineering, 9, 141-148. https://doi.org/10.4236/epe.2017.94B017, (2017) [CrossRef] [Google Scholar]
  • M.G.A. Vieira, L. Estrella, S.C.S. Rocha, Drying Technology: An International Journal, 25:10, 1639–1648, DOI: 10.1080/07373930701590806, (2007) [CrossRef] [Google Scholar]
  • L. Helena, C.D. Sousa, O.C. Motta Lima, N.C. Pereira, Drying Technology, 24: 485–497, DOI: 10.1080/07373930600611984, (2006) [CrossRef] [Google Scholar]
  • Y. Choi, B. Jung, N. Sung, Y. Han, J Mater Cycles Waste Manag, DOI 10.1007/s10163-014-0248-8, (2014) [Google Scholar]
  • (niepublikowane badania Frączek, Wróbel Modeling of RDF pelletization proces, 2016) [Google Scholar]
  • PN-EN ISO 638:2008 - Paper, board and pulps - Determination of dry matter content - Oven-drying method (ISO 638:2008) [Google Scholar]
  • PN-EN 15414-3:2011 - Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample [Google Scholar]
  • J.S. Roberts, D.R. Kidd, O. Padilla-Zakour, Journal of Food Engineering, 89, 460–465, (2008) [Google Scholar]
  • C.J. Lomauro, A.S. Bakshi, T. P. Labuza, Journal of Food Science, Volume 50 (1985) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.