Open Access
Issue
BIO Web Conf.
Volume 69, 2023
The 2nd International Conference on Agriculture, Food, and Environment (2nd ICAFE 2023)
Article Number 03017
Number of page(s) 10
Section Food Science and Technology
DOI https://doi.org/10.1051/bioconf/20236903017
Published online 16 October 2023
  • R. Kumalasari, D. Desnilasari, dan S. P. Wadhesnoeriba, “Evaluation of chemical and organoleptic qualities of gluten-free dry noodle made from maize and cassava flours during storage,” Indonesian Journal of Agricultural Science, vol. 23, no. 3, p. 173, 2018. [Google Scholar]
  • R. Kumalasari, E. Sholichah, A. Haryanto, U. Hanifah, N. K. I. Mayasti, dan A. D. Yuniar, “Evaluation of uniformity of physical and texture quality in manufacture of gluten-free noodles using single-screw extruders: a case study on local SMEs in Subang district-Indonesia,” Food Science and Technology, vol. 42, 2022. [CrossRef] [Google Scholar]
  • E. Sholichah, N. Indrianti, L. E. Yulianti, A. Sarifudin, dan W. Kiatponglarp, “Impact of tempeh flour supplementation on the properties of non-gluten pasta product,” African Journal of Food, Agriculture, Nutrition and Development, vol. 20, no. 7, pp. 16905–21, 2020. [CrossRef] [Google Scholar]
  • A. Altan dan M. Maskan, “Development of extruded foods by utilizing food industry by-products,” Dalam Advances in Food Extrusion Technology, ed. M. dan Maskan A. Altan, Florida: CRC Press, 2012, pp. 121–167. [Google Scholar]
  • M. Kazemzadeh, “Introduction to extrusion technology,” Dalam Advances in Food Extrusion Technology, ed. M. dan Maskan A. Altan, Florida: CRC Press, 2012, pp. 1–21. [Google Scholar]
  • J. M. Harper, “Extrusion of Foods,” Boca Raton: CRC Press, 1981. [Google Scholar]
  • T. Muhandri, “Mekanisme proses pembuatan mi berbahan baku jagung,” Buletin Teknologi Pascapanen Pertanian, vol. 8, no. 2, 2012. [Google Scholar]
  • T. Muhandri, A. B. Ahza, dan R. Syarief, “Optimasi proses ekstrusi mi jagung dengan metode permukaan respon [Optimization of corn noodle extrusion using response surface methodology],” Jurnal Teknologi dan Industri Pangan, vol. 22, no. 2, p. 97, 2011. [Google Scholar]
  • M. A. Giménez, R. J. Gonzalez, J. Wagner, R. Torres, M. O. Lobo, dan N. C. Samman, “Effect of extrusion conditions on physicochemical and sensorial properties of corn-broad beans (Vicia faba) spaghetti type pasta,” Food Chem, vol. 136, no. 2, pp. 538–545, 2013. [CrossRef] [PubMed] [Google Scholar]
  • C. Abeykoon et al., “Investigation of the process energy demand in polymer extrusion: A brief review and an experimental study,” Applied Energy, vol. 136, pp. 726–737, 2014. [CrossRef] [Google Scholar]
  • J. Deng et al., “Energy monitoring and quality control of a single screw extruder,” Applied Energy, vol. 113, pp. 1775–1785, 2014. [CrossRef] [Google Scholar]
  • J. Anderson, C. Rauwendaal, dan M. Noriega, “Troubleshooting extrusion problems,” SPE ANTEC Tech, vol. 1, pp. 127–134, 1997. [Google Scholar]
  • J. Vera-Sorroche et al., “Thermal optimization of polymer extrusion using in-process monitoring techniques,” Applied Thermal Engineering, vol. 53, no. 2, pp. 405–413, 2013. [CrossRef] [Google Scholar]
  • C. Abeykoon et al., “Process efficiency in polymer extrusion: Correlation between the energy demand and melt thermal stability,” Applied Energy, vol. 135, pp. 560–571, 2014. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.