Open Access
| Issue |
BIO Web Conf.
Volume 69, 2023
The 2nd International Conference on Agriculture, Food, and Environment (2nd ICAFE 2023)
|
|
|---|---|---|
| Article Number | 05002 | |
| Number of page(s) | 11 | |
| Section | Smart Technologies in Agricultural Systems | |
| DOI | https://doi.org/10.1051/bioconf/20236905002 | |
| Published online | 16 October 2023 | |
- J. P. Castaño-Sánchez et al., “Grass finishing of Criollo cattle can provide an environmentally preferred and cost effective meat supply chain from United States drylands,” Agric. Syst., vol. 210, no. February, pp. 103694, 2023, doi: 10.1016/j.agsy.2023.103694. [CrossRef] [Google Scholar]
- BPS, “Populasi Ternak Sapi Perah dan Sapi Potong Menurut Kabupaten/Kota dan Jenis Ternak di Provinsi Jawa Timur (ekor), 2021 dan 2022,” BPS Jawa Timur, 2023. [Online]. Available: https://jatim.bps.go.id/statictable/2023/03/21/2590/-populasi-ternak-sapi-perah-dan-sapi-potong-menurut-kabupaten-kota-dan-jenis-ternak-di-provinsi-jawa-timur-ekor-2021-dan-2022.html [Google Scholar]
- R. Aprilliandi, S. Suharyatun, dan A. Haryanto, “Jurnal Agricultural Biosystem Engineering Uji Kinerja Mesin Pencacah Tipe Multiguna untuk Pencacahan Tongkol Performance Test of Chopper Machine Multifunction Type for Chopped the Corncob,” J. Agric. Biosyst. Eng., vol. 1, no. 3 pp. 300–310, 2022. [Google Scholar]
- Á. Kovács dan G. Kerényi, “Physical characteristics and mechanical behaviour of maize stalks for machine development,” Int. Agrophysics, vol. 33, no. 4 pp. 427–436, 2019. doi: 10.31545/intagr/113335. [CrossRef] [Google Scholar]
- R. Popa dan V. Popa, “Research on optimization of knife approach angle for cutting maize and sorghum stalks,” Eng. Rural Dev., vol. 19, pp. 1308–1312, 2020, doi: 10.22616/ERDev.2020.19.TF327. [Google Scholar]
- I. Inounu et al., “Riset Pengembangan Inovatif Kolaboratif : Upaya Peningkatan Kemandirian Pakan.” [Google Scholar]
- Y. Zhang, A. E. Ghaly, dan B. Li, “Physical properties of corn residues,” Am. J. Biochem. Biotechnol., vol. 8, no. 2 pp. 44–53, 2012. doi: 10.3844/ajbbsp.2012.44.53. [CrossRef] [Google Scholar]
- X. Chen, C. Wu, Y. Tao, J. Wu, P. Yang, dan Y. Han, “SIT-based LUCC assessment system for sustainable agriculture development in western China methodology and case study,” Int. Geosci. Remote Sens. Symp., vol. 4, no. 1525467 pp. 2422–2425, 2005. doi: 10.1109/IGARSS.2005.1525467. [Google Scholar]
- Z. Zhao, Z. Wang, B. Zhao, Y. Song, dan M. Xin, “Designing a Longitudinal Hob-Type Stalk Chopping Device for Corn Combine Harvester,” INMATEH - Agric. Eng., vol. 67, no. 2 pp. 41–52, 2022. doi: 10.35633/inmateh-67-04. [CrossRef] [Google Scholar]
- Erinofiardi, “Analisa Kerja Belt Conveyor 5857-V Kapasitas 600 Ton/Jam,” J. Rekayasa Mesin, vol. 3, no. 3 pp. 450–458, 2012. [Google Scholar]
- A. N. Borotov, “Parameters and operation process of supplier rollers of the feed chopper device,” IOP Conf. Ser Earth Environ. Sci., vol. 868, no. 1, pp. 012035, 2021, doi: 10.1088/1755-1315/868/1/012035. [CrossRef] [Google Scholar]
- U. A. Hamakonda, E. Bere, M. Muhdin, dan F.L. Lalus, “Pengaruh Perbedaan Kecepatan Putaran Mesin (rpm) Terhadap Kinerja Mesin Pencacah Limbah Jagung untuk Pakan Ternak Sapi di Nusa Tenggara Timur,” pp. 1–5, 2013. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.