Open Access
| Issue |
BIO Web Conf.
Volume 86, 2024
International Conference on Recent Trends in Biomedical Sciences (RTBS-2023)
|
|
|---|---|---|
| Article Number | 01112 | |
| Number of page(s) | 12 | |
| DOI | https://doi.org/10.1051/bioconf/20248601112 | |
| Published online | 12 January 2024 | |
- ACI 2006. ACI 440.1R-06: Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars, The American Concrete Institute, USA. [Google Scholar]
- ACI 2004. ACI 440.3R-04: Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures,The American Concrete Institute, USA. [Google Scholar]
- CSA 2002. CAN/CSA-S806-02: Design and Construction of Building Components with Fibre-Reinforced Polymers, Canadian Standards Association, Canada. [Google Scholar]
- CSA 2006. CAN/CSA-S6-06: Canadian Highway Bridge Design Code, Canadian Standards Association, Canada. [Google Scholar]
- Japan Society of Civil Engineers (JSCE), “Recommendationsfor design and construction of concrete structures using continuous fibre reinforced materials,” in Research Committee on Continuous Fibre Reinforced Materials, A. Machida, Ed., JapanSociety of Civil Engineers (JSCE),Tokyo, Japan. [Google Scholar]
- CNR-DT 203/2006: Guide for the Design and Сonstruction of Concrete Structures Reinforced with Fiber-Reinforced Polymer Bars, Consiglio Nazionale Delle Ricerche. [Google Scholar]
- GOST 31938-2012 : Fibre-reinforced polymer bar for concrete reinforcement. General specifications, Moscow, Russia. [Google Scholar]
- GOST 32492-2015: Fiber-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties, Moscow, Russia. [Google Scholar]
- SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules, Moscow, Russia. [Google Scholar]
- Alaimo, G., Valenza, A., Enea, D and Fiore, V., 2016. The durability of basalt fibres reinforced polymer (BFRP) panels for cladding. Materials and Structures 49(6), 2053–2064. [CrossRef] [Google Scholar]
- Ammar, M. A., 2014. Bond durability of basalt fiber-reinforced polymers (BFRP) bars under freeze-and-thaw conditions. Thesis, Quebec, Canada, pp. 105. [Google Scholar]
- Chikhradze, N.M., Japaridze, L.A. and Abashidze, G.S., 2012. Properties of basalt plastics and of composites reinforced by hybrid fibers in operating conditions. In: Composites and their applications, edited by Ning Hu, 243-268. [Google Scholar]
- Dhand, V., Mittal, G., Rhee, K. Y., Park, S.-J. and Hui, D., 2015. A short review on basalt fiber reinforced polymer composites. Composites Part B: Engineering,73(5), 166-180. [CrossRef] [Google Scholar]
- Khalili, S.M.R., Najafi, M. and Farsani, R.E., 2017. Effect of thermal cycling on the tensile behavior of polymer composites reinforced by basalt and carbon fibers. Mechanics of Composite Materials, 52(6), 807-816. [CrossRef] [Google Scholar]
- Li H., Xian G., Ma M.. and Wu J., 2012. Durability and fatigue performances of basalt fiber/epoxy reinforcing bars. Proc. of 6th Int. Conf. on FRP Composites in Civil Engineering, Rome, Italy, 8. [Google Scholar]
- Liu Q., Shaw M. T., Parnas R. S. and McDonnell A.-M., 2006. Investigation of basalt fiber composite mechanical properties for applications in transportation, Polymer Composites, 27, 41-48. [Google Scholar]
- Matykiewicz D., Lewandowski K. and Dudziec B., 2017. Evaluation of thermomechanical properties of epoxy–basalt fibre composites modified with zeolite and silsesquioxane. Composite Interfaces, 24, 5, 489-498. [CrossRef] [Google Scholar]
- Najafi M., Khalili S.M.R., and Farsani R.E., 2016. Accelerated heat aging study of phenolic/basalt fiber reinforced composites. Mechanics of Advanced Composite Structures 3(1), 1-7. [Google Scholar]
- Pandian, A., Vairavan M., Thangaiah W. J. J. and Uthayakumar M., 2014. Effect of moisture absorption behavior on mechanical properties of basalt fibre reinforced polymer matrix composites», Journal of Composites 2014, 587980. [Google Scholar]
- Parnas, R., Shaw, M and Liu, Q., 2007. Basalt fiber reinforced polymer composites. Technical Report NETCR63. Institute of Materials Science,University of Connecticut, 133. [Google Scholar]
- Refai, A.El., 2014. Durability and fatigue of basalt fiber-reinforced polymer bars gripped with steel wedge anchors. Journal of Composites for Construction, 19, 04014078. [Google Scholar]
- Refai, A. El, Abed F.; and Altalmas A., 2013. Bond durability of basalt fiber–reinforced polymer bars embedded in concrete under direct pullout conditions. Journal of Composites for Construction 18, 04013006. [CrossRef] [Google Scholar]
- Startsev, V.O., Lebedev, M.P., Kychkin, A.K., 2018. Influence of moderately warm and extremely cold climate on properties of basalt plastic armature. Heliyon 4(12), e01060. [CrossRef] [PubMed] [Google Scholar]
- Wu, G., Wang, X., Wu, Z., Dong, Z. and Zhang, G., 2015. Durability of basalt fibers and composites in corrosive environments. Journal of Composite Materials 49, 873–887. [CrossRef] [Google Scholar]
- Xie, Y., Guan, K. and Lai, L., 2016. Effect of chloride on tensile and bending capacities of basalt frp mesh reinforced cementitious thin plates under indoor and marine environments. International Journal of Polymer Science 2016, 7162313. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.