Open Access
| Issue |
BIO Web Conf.
Volume 97, 2024
Fifth International Scientific Conference of Alkafeel University (ISCKU 2024)
|
|
|---|---|---|
| Article Number | 00094 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/bioconf/20249700094 | |
| Published online | 05 April 2024 | |
- Chadli, M., Mekki, M., & Mezghiche, B. (2018). Formulation and study of metal fiber-reinforced reactive powder concrete. World Journal of Engineering, 15(4), 531–539. [CrossRef] [Google Scholar]
- Bae, B.I., Lee, M.S., Choi, C.S., Jung, H.S., & Choi, H.K. (2021). Evaluation of the ultimate strength of the ultra-high-performance fiber-reinforced concrete beams. Applied Sciences, 11(7), 2951. [CrossRef] [Google Scholar]
- Mostofinejad, D., Nikoo, M.R., & Hosseini, S.A. (2016). Determination of optimized mix design and curing conditions of reactive powder concrete (RPC). Construction and Building Materials, 123, 754–767. [CrossRef] [Google Scholar]
- Moslehi, A., Dashti Rahmatabadi, M.A., & Arman, H. (2023). Determination of Optimized Mix Design of Reactive Powder Concrete. Advances in Civil Engineering, 2023. [CrossRef] [Google Scholar]
- Mizani, J., Sadeghi, A.M., & Afshin, H. (2022). Experimental study on the effect of macro and microfibers on the mechanical properties of reactive powder concrete. Structural Concrete, 23(1), 240–254. [CrossRef] [Google Scholar]
- Tam, C.M., Tam, V.W., & Ng, K.M. (2010). Optimal conditions for producing reactive powder concrete. Magazine of Concrete Research, 62(10), 701–716. [CrossRef] [Google Scholar]
- Lee, N., & Chisholm, D. (2005). Reactive Powder Concrete, Study Report, S.R. 146. Ltd, Judgeford, New Zealand. [Google Scholar]
- Huynh, L., Foster, S., Valipour, H., & Randall, R. (2015). High strength and reactive powder concrete columns subjected to impact: Experimental investigation. Construction and building materials, 78, 153–171. [CrossRef] [Google Scholar]
- Liu, S., Xie, G., & Rao, M. (2013). Effect of waste glass powder on properties and microstructure of ultrahigh performance cement based materials. Materials Research Innovations, 17(sup1), 210–214. [CrossRef] [Google Scholar]
- Richard, P. (1996). A new ultra-high strength cementitious material. In Proc. 4th Intl. Symp. on Utilization of High Strength/High Performance Cencrete (pp. 1343–1349). [Google Scholar]
- Matte, V., & Moranville, M. (1999). Durability of reactive powder composites: influence of silica fume on the leaching properties of very low water/binder pastes. Cement and concrete composites, 21(1), 1–9. [CrossRef] [Google Scholar]
- Yu, R., Spiesz, P., & Brouwers, H.J.H. (2014). Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC). Cement and concrete research, 56, 29–39. [CrossRef] [Google Scholar]
- Gao, R., Stroeven, P., & Hendriks, C.F. (2005). Mechanical properties of reactive powder concrete beams. Special Publication, 228, 1237–1252. [Google Scholar]
- Warnock, R. (2005). Short-Term and Time-Dependent Flexural Behavior of Steel-Fiber Reinforced Reactive Powder Concrete Beams. University of New South Wales. [Google Scholar]
- IQS (Iraqi Specifications of Central Agency for Standardization and Quality Control of Planning Council). 1984. Standard specification for portland cement. IQS 5-1984. Baghdad, Iraq: IQS. [Google Scholar]
- Richard, P., & Cheyrezy, M. (1995). Composition of reactive powder concretes. Cement and concrete research, 25(7), 1501–1511. [CrossRef] [Google Scholar]
- Aldred, J.M., Holland, T.C., Morgan, D.R., Roy, D.M., Bury, M.A., Hooton, R.D., … & Jaber, T.M. (2006). Guide for the use of silica fume in concrete. ACI-American Concrete Institute-Committee: Farmington Hills, MI, USA, 234. [Google Scholar]
- ASTM. 2015b. Standard specification for silica fume used in cementitious mixtures. ASTM C1240. West Conshohocken, PA: ASTM. [Google Scholar]
- ASTM. 2015a. Standard specification for chemical admixtures for concrete. ASTM C494/C494M. West Conshohocken, PA: ASTM. [Google Scholar]
- Astm, C. (2018). 1611-M14. Standard Test Method for Slump Flow of Self-Consolidating Concrete, 1, 1–6. [Google Scholar]
- ASTM Designation A615/A615M-01b, 2001, Standard Specifications for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement, Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia, Pennsylvania, vol. 1.04. [Google Scholar]
- ASTM. 2018. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. ASTM C39/C39M-18. West Conshohocken, PA: ASTM. [Google Scholar]
- ASTM. 2017. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. ASTM C496-96. West Conshohocken, PA: ASTM. [Google Scholar]
- ASTM. 2018. Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete. ASTM C42/C42M-18a. West Conshohocken, PA: ASTM. [Google Scholar]
- ASTM. 2002. Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression. ASTM C469-02. West Conshohocken, PA: ASTM. [Google Scholar]
- ACI Committee 318, (2014). Building Code Requirements for Structural Concrete and Commentary. Reported by ACI Committee 318M, 2014. [Google Scholar]
- ACI Committee-363, “State of the Art Report on High Strength Concrete (ACI 363R-92),” American Concrete Institute, Detroit, 1997. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.