Open Access
| Issue |
BIO Web Conf.
Volume 117, 2024
International Conference on Life Sciences and Technology (ICoLiST 2023)
|
|
|---|---|---|
| Article Number | 01016 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/bioconf/202411701016 | |
| Published online | 05 July 2024 | |
- X. Pang, X. Zhuang, Z. Tang, X. Chen, Polylactic acid (PLA): Research, development and industrialization. Biotechnol J. 5, 1125 (2010). https://doi.org/10.1002/biot.201000135 [CrossRef] [PubMed] [Google Scholar]
- E. Gkartzou, E.P. Koumoulos, C.A. Charitidis, Production and 3D printing processing of bio-based thermoplastic filament. Manuf Rev (Les Ulis). 4, (2017). https://doi.org/10.1051/mfreview/2016020 [Google Scholar]
- Y. Cheng, S. Deng, P. Chen, R. Ruan, Polylactic acid (PLA) synthesis and modifications: a review. Frontiers of Chemistry in China. 4, 259 (2009). https://doi.org/10.1007/s11458-009-0092-x [CrossRef] [Google Scholar]
- S. Farah, D.G. Anderson, R. Langer, Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review. Adv Drug Deliv Rev. 107, 367 (2016). https://doi.org/10.1016/j.addr.2016.06.012 [CrossRef] [Google Scholar]
- T. Oladimeji Azeez, Thermoplastic Recycling: Properties, Modifications, and Applications. (2019). https://doi.org/10.5772/intechopen.81614 [Google Scholar]
- Z. Asadi, A. Javadi, F. Mohammadzadeh, K. Alavi, Investigation on the role of nanoclay and nano calcium carbonate on morphology, rheology, crystallinity and mechanical properties of binary and ternary nanocomposites based on PLA. International Journal of Polymer Analysis and Characterization. 26, 1 (2021). https://doi.org/10.1080/1023666X.2020.1836459 [CrossRef] [Google Scholar]
- M. Silva, C. Gomes, I. Pinho, H. Gonçalves, A.C. Vale, J.A. Covas, N.M. Alves, M.C. Paiva, Poly(Lactic acid)/graphite nanoplatelet nanocomposite filaments for ligament scaffolds. Nanomaterials. 11, (2021). https://doi.org/10.3390/nano11112796 [Google Scholar]
- A. Maurel, M. Courty, B. Fleutot, H. Tortajada, K. Prashantha, M. Armand, S. Grugeon, S. Panier, L. Dupont, Highly Loaded Graphite-Polylactic Acid Composite-Based Filaments for Lithium-Ion Battery Three-Dimensional Printing. Chemistry of Materials. 30, 7484 (2018). https://doi.org/10.1021/acs.chemmater.8b02062 [CrossRef] [Google Scholar]
- J.S. Stefano, L.R. Guterres e Silva, R.G. Rocha, L.C. Brazaca, E.M. Richter, R.A. Abarza Muñoz, B.C. Janegitz, New conductive filament ready-to-use for 3D-printing electrochemical (bio)sensors: Towards the detection of SARS-CoV-2. Anal Chim Acta. 1191, (2022). https://doi.org/10.1016/j.aca.2021.339372 [CrossRef] [Google Scholar]
- J. Li, H. Zeng, Z. Zeng, Y. Zeng, T. Xie, Promising Graphene-Based Nanomaterials and Their Biomedical Applications and Potential Risks: A Comprehensive Review. ACS Biomater Sci Eng. 7, 5363 (2021). https://doi.org/10.1021/acsbiomaterials.1c00875 [CrossRef] [Google Scholar]
- D. Fico, D. Rizzo, R. Casciaro, C.E. Corcione, A Review of Polymer-Based Materials for Fused Filament Fabrication (FFF): Focus on Sustainability and Recycled Materials. Polymers (Basel). 14, (2022). https://doi.org/10.3390/polym14030465 [Google Scholar]
- K.W. Kim, B.H. Lee, H.J. Kim, K. Sriroth, J.R. Dorgan, Thermal and mechanical properties of cassava and pineapple flours-filled PLA bio-composites. J Therm Anal Calorim. 108, 1131 (2012). https://doi.org/10.1007/s10973-011-1350-y [CrossRef] [Google Scholar]
- E. Narimissa, R.K. Gupta, H.J. Choi, N. Kao, M. Jollands, Morphological, mechanical, and thermal characterization of biopolymer composites based on polylactide and nanographite platelets. Polym Compos. 33, 1505 (2012). https://doi.org/10.1002/pc.22280 [CrossRef] [Google Scholar]
- R. Guo, Z. Ren, H. Bi, M. Xu, L. Cai, Electrical and thermal conductivity of polylactic Acid (PLA)-based biocomposites by incorporation of nano-graphite fabricated with fused deposition modeling. Polymers (Basel). 11, (2019). https://doi.org/10.3390/polym11030549 [Google Scholar]
- R. Checchetto, D. Rigotti, A. Pegoretti, A. Miotello, Conference paper Chloroform desorption from poly ( lactic acid ) nanocomposites : a thermal desorption spectroscopy study. (2019). [Google Scholar]
- W. Liu, J. Zhou, Y. Ma, J. Wang, J. Xu, Fabrication of PLA Filaments and its Printable Performance. IOP Conf Ser Mater Sci Eng. 275, (2018). https://doi.org/10.1088/1757-899X/275/1/012033 [Google Scholar]
- I. Blanco, The Use of Composite Materials in 3D Printing. Journal of Composites Science. 4, 42 (2020). https://doi.org/10.3390/jcs4020042 [CrossRef] [Google Scholar]
- E.H. Tümer, H.Y. Erbil, Extrusion-based 3d printing applications of pla composites: A review. Coatings. 11, 1 (2021). https://doi.org/10.3390/coatings11040390 [Google Scholar]
- D. Kaczor, K. Bajer, G. Domek, P. Madajski, A. Raszkowska-Kaczor, P. Szroeder, Influence of Extruder Plasticizing Systems on The Selected Properties of PLA/Graphite Composite. Acta Mechanica et Automatica. 16, 316 (2022). https://doi.org/10.2478/ama-2022-0038 [CrossRef] [Google Scholar]
- D. Kaczor, K. Fiedurek, K. Bajer, A. Raszkowska-Kaczor, G. Domek, M. Macko, P. Madajski, P. Szroeder, Impact of the graphite fillers on the thermal processing of graphite/poly(Lactic acid) composites. Materials. 14, (2021). https://doi.org/10.3390/ma14185346 [Google Scholar]
- Y. Kopelevich, P. Esquinazi, Graph ene physics in graphite. Advanced Materials. 19, 4559 (2007). https://doi.org/10.1002/adma.200702051 [CrossRef] [Google Scholar]
- I. Blanco, G. Cicala, G. Recca, C. Tosto, Specific Heat Capacity and Thermal Conductivity Measurements of PLA-Based 3D-Printed Parts with Milled Carbon Fiber Reinforcement. Entropy. 24, (2022). https://doi.org/10.3390/e24050654 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.