Open Access
| Issue |
BIO Web Conf.
Volume 228, 2026
Biospectrum 2025: International Conference on Biotechnology and Biological Science
|
|
|---|---|---|
| Article Number | 04002 | |
| Number of page(s) | 6 | |
| Section | Environmental Biotechnology | |
| DOI | https://doi.org/10.1051/bioconf/202622804002 | |
| Published online | 11 March 2026 | |
- J. Alias, N. Mohamed, M. Ishak, X. Zhou, G. Thompson, The Influence of Hot Forming on the Microstructure and Corrosion Behaviour of AZ31B Magnesium Alloys. Indonesian Journal of Science and Technology. 3, 2 (2018). https://doi.org/10.17509/ijost.v3i2.12758 [Google Scholar]
- H. Gerengi, Cabrini Marina, Solomon, M. Moses, Kaya Ertugrul, Gritti, Luca, Yola, L. Mehmet, Chemical, Electrochemical, and Surface Morphological Studies of the Corrosion Behavior of the AZ31 Alloy in Simulated Body Fluid: Effect of NaOH and H2O2 Surface Pretreatments on the Corrosion Resistance Property. 7, 30 (2022) https://doi.org/10.1021/acsomega.2c02998 [Google Scholar]
- K. Kittner, C. Kaden, M. Ullmann, et al., Production of AZ80 magnesium alloy wires: influence of heat treatment on microstructure and properties after twin-roll casting. Prod. Eng. Res. Devel. 19: 295–306 (2025) https://doi.org/10.1007/s11740-024-01310-1 [Google Scholar]
- W. Li, W. Qiao, X. Liu, D. Bian, D. Shen, Y. Zheng, J. Wu, K. Y. H. Kwan, T. M. Wong, K. M. C. Cheung, K. W. K. Yeung, Biomimicking Bone– Implant Interface Facilitates the Bioadaption of a New Degradable Magnesium Alloy to the Bone Tissue Microenvironment. Adv. Sci. 8, 23 (2021) https://doi.org/10.1002/advs.202102035 [Google Scholar]
- J. Kuhlmann, I. Bartsch, E. Willbold, S. Schuchardt, O. Holz, N. Hort, D. Höche, W. R. Heineman, F. Witte, Fast escape of hydrogen from gas cavities around corroding magnesium implants. Acta Biomaterialia. 9, 10 (2013) https://doi.org/10.1016/j.actbio.2012.10.008 [Google Scholar]
- C. Rössig, N. Angrisani, P. Helmecke, S. Besdo, Jan-Marten Seitz, B. Welke,N. Fedchenko, H. Kock, J. Reifenrath, In vivo evaluation of a magnesium-based degradable intramedullary nailing system in a sheep model. Acta Biomaterialia. 25, 369-383 (2015) https://doi.org/10.1016/j.actbio.2015.07.025 [Google Scholar]
- S. Samberger, T. Kremmer, L. Stemper, S. Tourey, J. P. Uggowitzer, S. Pogatscher, Metallographic Etching of Al–Mg–Zn–(Cu) Crossover Alloys. Adv. Eng. Mater., 26 (2024) https://doi.org/10.1002/adem.202400576 [Google Scholar]
- A. Ercetin, F. Akkoyun, E. Şimşir, Y. D. Pimenov, K. Giasin, P. M. C. Gowdru, A. Lakshmikanthan, A. Wojciechowski. Image Processing of Mg-Al-Sn Alloy Microstructures for Determining Phase Ratios and Grain Size and Correction with Manual Measurement. Materials. 14, 17 (2021) https://doi.org/10.3390/ma14175095 [Google Scholar]
- Guang-Ling Song and Z. Xu. Effect of microstructure evolution on corrosion of different crystal surfaces of AZ31 Mg alloy in a chloride containing solution. Corrosion Science. 54: 97-105 (2012) https://doi.org/10.1016/j.corsci.2011.09.005 [Google Scholar]
- A. Tripathi and I. Samajdar and J.F. Nie and A. Tewari. Study of grain structure evolution during annealing of a twin-roll-cast Mg alloy. Materials Characterization. 114: 1044-5803. (2016) https://doi.org/10.1016/j.matchar.2016.02.019 [Google Scholar]
- F. Zhou and S. S. Lu and B. Jiang and R.G. Song. Effect of annealing treatment of hot-rolled AZ31 magnesium alloy on properties and stress corrosion resistance of MAO coatings. Anti-Corrosion Methods and Materials. 71, 4: 403-416 (2024) https://doi.org/10.1108/ACMM-01-2024-2954 [Google Scholar]
- F. Ning, Q. Le, S. Kong. Effect of annealing temperature on corrosion properties of rolled AZ31-Ce magnesium alloy. SN Appl. Sci. 2, 762 (2020) https://doi.org/10.1007/s42452-020-2398-8 [Google Scholar]
- Fakhri, B. Noora, Abbass, K. Muna, Hanoon, M. Mahdi, Improvement the Microstructure and Mechanical Properties of AZ31 Magnesium Alloy using Stir Friction Processing. IOP Conference Series: Earth and Environmental Science. 1507, 1 (2025) https://doi.org/10.1088/1755-1315/1507/1/012090 [Google Scholar]
- M. Moses, M. Ullmann, U. Prahl. Twin-Roll Casting as a Grain Refinement Method and Its Influence on the Microstructure and Deformation Behavior of an AZ31 Magnesium Alloy Wire. Crystals. 13, 10: 1409 (2023) https://doi.org/10.3390/cryst13101409 [Google Scholar]
- Yavuzyegit, Berzah, Karali Aikaterina, De Mori Arianna, Smith, Nigel, Usov, Sergey, Shashkov, Pavel, Bonithon, Roxane, Blunn, Gordon. Evaluation of Corrosion Performance of AZ31 Mg Alloy in Physiological and Highly Corrosive Solutions. ACS Applied Bio Materials. 7, 3: 1735-1747 (2024) https://doi.org/10.1021/acsabm.3c01169 [Google Scholar]
- U. Masood Chaudry, A. Farooq, A. Malik, M. Nabeel, M. Sufyan, A. Tayyeb, S. Asif, A. Inam, A. Elbalaawy, E. Hafez, Tea-Sung Jun, K. Hamad. Biodegradable properties of AZ31-0.5Ca magnesium alloy. Materials Technology. 37, 12: 2230–2241. (2022) https://doi.org/10.1080/10667857.2021.2022571 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.