Issue |
BIO Web Conf.
Volume 172, 2025
International Conference on Nurturing Innovative Technological Trends in Engineering – BIOscience (NITTE-BIO 2025)
|
|
---|---|---|
Article Number | 03004 | |
Number of page(s) | 15 | |
Section | Environmental Biotechnology / Bioprocess Control | |
DOI | https://doi.org/10.1051/bioconf/202517203004 | |
Published online | 10 April 2025 |
Synthesis of Nanocellulose from Indigenous Sources and Application in Dye Removal
NITTE (Deemed to be University), Department of Biotechnology Engineering, NMAM Institute of Technology, Nitte, Karnataka 574110, India
* Corresponding author: h_jathanna@yahoo.co.in
The synthesis of an adsorbent that is low cost, effective and sustainable, from two main indigenous agricultural and domestic wastes namely rice husk and lemon peel was conducted in the study to inspect its potential to remove Congo Red, a hazardous anionic dye capable of gravely polluting water bodies. The synthesis of nanocellulose from these sources was catered via a combined approach of chemical and mechanical treatments, involving dependence on acid hydrolysis and sonication. Adsorption kinetics were performed post-synthesis to determine which among the two sources performed better in Congo Red dye adsorption. These studies were carried out by subjecting varying amounts of nanocellulose adsorbent to different quantities of dye and their adsorption capacities were evaluated under changing conditions of pH and contact time. Adsorption isotherms such as linear, Freundlich, and Langmuir were used so that the adsorption capacity of the adsorbents could be predicted. The results demonstrated that lemon peel behaved as a better adsorbent at pH 3.0 for an absorbent dose of 0.3g and showed maximum adsorption at a dye concentration of 80 mg/L.
Key words: Nanocellulose / adsorption / rice husk / lemon peel / agricultural wastes
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.