Open Access
Issue
BIO Web Conf.
Volume 52, 2022
International Scientific-Practical Conference “Agriculture and Food Security: Technology, Innovation, Markets, Human Resources” (FIES 2022)
Article Number 00045
Number of page(s) 5
DOI https://doi.org/10.1051/bioconf/20225200045
Published online 21 September 2022
  • D. V. Ushtyk, Criteria for optimizing the parameters of tillage aggregates and tractors. Resource-saving technologies in the agro-industrial complex of Russia, Materials of the II International Scientific Conference (Krasnoyarsk) pp 322–326 (2022) [Google Scholar]
  • A. M. Dementiev, Ensuring energy saving in technological processes of soil cultivation by optimal design of combined aggregates of block-modular structure: abstract of the PhD dissertation (2011) [Google Scholar]
  • Y. D. Pogulyaev, Increasing the productivity of machine-tractor aggregates on the basis of optimal and quasi-optimal control of energy modes: abstract of the PhD dissertation, (Chelyabinsk, 2006) [Google Scholar]
  • A. V. Filin, Selection of machine and tractor units for maximum productivity and minimum operating costs. Energy-Efficient and Resource-Saving Technologies and Systems: Interuniversity Collection of Scientific Papers, Saransk: National Research Mordovian State University named after N.P. Ogarev pp 235–237 (2016) [Google Scholar]
  • A. R. Valiev, et al., Agro-bio-techno park as an innovative factor of increasing competitiveness of agriculture under global challenges, Rural development. Bioeconomy Challenges, pp 1365–1368 (2017) [Google Scholar]
  • C. Khafizov, A. Nurmiev, R. Khafizov, N. Adigamov, Method of justification for parameters of tractor-implement unit with regard to their impact on crop productivity, Engineering for Rural Development: Proceedings pp 176–185 (2018) [Google Scholar]
  • I. Gainutdinov, Beet production efficiency and ways to increase it in case of negative market conditions in the commodity market, BIO Web of Conferences 17, 00108, (2020) [CrossRef] [EDP Sciences] [Google Scholar]
  • I.G. Gainutdinov, R.R. Gadelshin, Prospects for the development of production and processing of potatoes in Russia, Vector of economy, 6(48), 30, (2020). [Google Scholar]
  • S. A. Sinitskiy, V. M. Medvedev, Influence of dynamic factors on the indicators of the MTA engine at an unstable load, Technics and equipment for the village, 4(274), 16-19, (2020) [Google Scholar]
  • I. G. Galiev, A. A. Mukhametshin, I. R. Iskhakov, A. R. Shamsutdinov, Increasing the efficiency of tractors in modern conditions, Bulletin of Kazan State Agrarian University 1 (12), 169–172 (2009) [Google Scholar]
  • M. N. Kalimullin, R. K. Abdrakhmanov, I. G. Galiev. Perfection of potato cultivation technology, Technics and equipment for the village 4, 6–9 (2017) [Google Scholar]
  • The farming system of the Republic of Tatarstan. Innovation based on tradition. Part 1. General aspects of agriculture. Center for Innovative Technologies, Kazan, 168, (2013) [Google Scholar]
  • The farming system of the Republic of Tatarstan. Part 2. Agricultural technology for the production of crops, Center for Innovative Technologies, Kazan, 292, (2014) [Google Scholar]
  • The farming system of the Republic of Tatarstan. Part 3. The system of organization and management of production in agriculture (agrarian management), Center for Innovative Technologies, Kazan, 280, (2014) [Google Scholar]
  • N. V. Trofimov, S. R. Suleimanov, S. V. Sochneva, N. A. Loginov, Adaptive landscape farming system - the basis for land conservation in the Republic of Tatarstan, Bulletin of Kazan State Agrarian University 13 (1 (48), 69–73 (2018) [Google Scholar]
  • R. S. Shakirov, M. Sh. Tagirov, Increasing the efficiency of agriculture in the Republic of Tatarstan, Agriculture 7, 9–12 (2014) [Google Scholar]
  • R. I. Safin, A. R. Valiev, R. V. Minikayev et al., Establishment of the precision farming system in the Republic of Tatarstan, Bulletin of Kazan State Agrarian University 5 (2 (16), 153–156 (2010) [Google Scholar]
  • I. G. Galiev, Ensuring possibility of functioning of tractors in agricultural production taking Into account residual resources of their units and systems, Engineering for Rural Development, 48–53 (2020) [Google Scholar]
  • E. Alekseenkova, Integrated approach. Combined sowing machines market, AgroForum 5, 56–62 (2021) [Google Scholar]
  • M. I. Sanzharovskaya, Agromaster – technology of the only passage through the stubble. Engineering and technical support of the agro-industrial complex, Abstract Journal 1, 242, (2009) [Google Scholar]
  • R. N. Khafizov, Optimization of the main parameters of the tractor and aggregate for sowing grain crops taking into account their influence on the harvest: abstract of the PhD dissertation (2017) [Google Scholar]
  • K. A. Khafizov, Optimization of parameters and modes of operation of the MTA on the basis of energy analysis, Tractors and Agricultural Machines 7, 32–34 (2006) [Google Scholar]
  • C. A. Khafizov, Optimization of main parameters of tractor and unit for plowing soil, taking into account their influence on yield of grain crops Engineering for Rural Development, pp 585–590 (2020) [Google Scholar]
  • A. Nurmiev, Optimization of main parameters of tractor working with soil-processing implement, Engineering for Rural Development: Proceedings (Jelgava), 161–167 (2018) [Google Scholar]
  • K. A. Khafizov, Reduction of total energy costs on technological operations in the agro-industrial complex - the way to reduce greenhouse gas emissions in the atmosphere, Bulletin of Kazan State Agrarian University 3 (63), 43–47 (2021) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.