Open Access
| Issue |
BIO Web Conf.
Volume 17, 2020
International Scientific-Practical Conference “Agriculture and Food Security: Technology, Innovation, Markets, Human Resources” (FIES 2019)
|
|
|---|---|---|
| Article Number | 00200 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/bioconf/20201700200 | |
| Published online | 28 February 2020 | |
- V.A. Levin, I.S. Manuylovich, V.V. Markov, Numerical Simulation of Spinning Detonation in Circular Section Channels, Computat. Mathem. and Mathem. Phys., 56(6), 1102–1117 (2016) [CrossRef] [Google Scholar]
- E.A. Storozhuk, I.S. Chernyshenko, A.V. Yatsura, Stress-Strain State Near a Hole in a Shear-Compliant Composite Cylindrical Shell with Elliptical Cross-Section, Int. Appl. Mechan., 54(5), 559–567 (2018) [CrossRef] [Google Scholar]
- I.B. Badriev, V.N. Paimushin, Refined Models of Contact Interaction of a Thin Plate with Positioned on Both Sides Deformable Foundations, Lobachevskii J. of Mathem., 38(5), 779–793 (2017) [CrossRef] [Google Scholar]
- I.B. Badriev, M.V. Makarov, V.N. Paimushin, Contact Statement of Mechanical Problems of Reinforced on a Contour Sandwich Plates with Transversally-Soft Core, Russ. Mathem., 61(1), 69–75 (2017) [CrossRef] [Google Scholar]
- A.S. Solodovnikov, S.V. Sheshenin, Numerical Study of Strength Properties for a Composite Material with Short Reinforcing Fibers, Moscow Univer. Mechan. Bull., 72(4), 94–100 (2017) [Google Scholar]
- V.N. Shlyannikov, A.P. Zakharov, A.V. Tumanov, Nonlinear fracture resistance parameters for elements of aviation structures under biaxial loading, Russ. Aeronaut., 61(3), 340–346 (2018) [CrossRef] [Google Scholar]
- F. Aldakheel, B. Hudobivnik, P. Wriggers, Virtual selection of phase definitions, Int. J. for Multiscale Computat. Engineer. (2018) [Google Scholar]
- L.U. Sultanov, Analysis of Finite Elasto-Plastic Strains. Medium Kinematics and Constitutive Equations, Lobachevskii J. of Mathem., 37(6), 787–793 (2016) [CrossRef] [Google Scholar]
- R.A. Kayumov, Postbuckling Behavior of Compressed Rods in an Elastic Medium, Mechan. of Solids, 52(5), 575–580 (2017) [Google Scholar]
- K.-J. Bathe, Finite Element Procedures (Prentice Hall, Englewood Cliffs, 1996) [Google Scholar]
- O.C. Zienkiewicz, R.L. Taylor, J.Z. Zhu, The Finite Element Method: Its Basis and Fundamentals (Butter-worth-Heinemann, United Kingdom, 2013) [Google Scholar]
- J.T. Oden, Finite Elements of Nonlinear Continua (McGraw-Hill, New York, 1971) [Google Scholar]
- A.M. Belostotsky, S.B. Penkovoy, S.V. Scherbina, P.A. Akimov, T.B. Kaytukov, Correct Numerical Methods of Analysis of Structural Strength and Stability of High-Rise Panel Buildings, Part 1: Theoretical Foundations of Modelling, Key Engineering Materials, 685, 217–220 (2016) [Google Scholar]
- E. Artioli, L.B.D.D. Veiga, C. Lovadina, E. Sacco, Arbitrary order 2d virtual elements for polygonal meshes: Part I, elastic problem, Computat. Mechan., 60, 355–377 (2017) [CrossRef] [Google Scholar]
- E. Artioli, L.B.D.D. Veiga, C. Lovadina, E. Sacco, Arbitrary order 2d for polygonal meshes: Part II, inelastic problem, Computat. Mechan., 60, 643–657 (2017) [CrossRef] [Google Scholar]
- P. Wriggers, W. Rust, B. Reddy, A virtual element method for contact, Computat. Mechan., 58, 1039–1050 (2016) [CrossRef] [Google Scholar]
- Ren Hui, Fast and robust triangular elements for thin plates/shells, with large deformations and large rotations, Trans. ASME. J. Comput. and Nonlinear Dyn., 10(5), 051018/1-051018/13 (2015) [Google Scholar]
- Y.V. Klochkov, A.P. Nikolaev, O.V. Vakhnina, T.A. Kiseleva, Using the Lagrange multiplexes in the triangles of the interregolation of displacements, J. of Applied and Industr. Mathem., 11(4), 535–544 (2017) [CrossRef] [Google Scholar]
- L.P. Zheleznov, V.V. Kabanov, D.V. Boiko, Elliptical Cylindrical Composite Shells under Torsion and Internal Pressure, Russ. Aeronaut., 61(2), 175–182 (2018) [Google Scholar]
- L.P. Zheleznov, V.V. Kabanov, D.V. Boiko, Nonlinear Deformation and Stability of Discretely Reinforced Elliptical Cylindrical Shells under Transverse Bending and Internal Pressure, Russ. Aeronaut., 57(2), 118–126 (2014) [CrossRef] [Google Scholar]
- V.P. Agapov, R.O. Golovanov, K.R. Aidemirov, Calculation of Load-Bearing Capacity of Prestressed Reinforced Concrete Trusses by the Finite Element Method, IOP Conf. Ser. Earth and Environmental Sci., 90, 012018 (2017) [Google Scholar]
- Yu.V. Klochkov, A.P. Nikolaev, T.A. Kiseleva, S. S. Marchenko, Comparative analysis of the results of finite element calculations based on an ellipsoidal shell, J. of Machin. Manufact. and Reliab., 45(4), 328–336 (2016) [CrossRef] [Google Scholar]
- Yamashita Hirok, Valkeapaa Antti I., Jayakumar Paramsothy, Syqiyama Hiroyuki, Continuum mechanics based bilinear shear deformable shell element using absolute nodal coordinate formulation, Trans. ASME. J. Comput. and Nonlinear Dyn., 10(5), 051012/1-051012/9 (2015) [Google Scholar]
- Nhung Nguyen, Anthonym Waas, Nonlinear, finite deformation, finite element analysis, ZAMP. Z. Angew. math. and Phys., 67(9), 35/1-35/24 (2016) [Google Scholar]
- Zhen Lei, F. Gillot, Jezeguel, Development of the mixed grid isogeometric Reissner-Mindlin shell: quadrate basis and modified quadrature, Int. J. Mech., 54, 105–119 (2015) [Google Scholar]
- A. Javili, A. Mc Bride, P. Steinmann, B.D. Reddy, A curvilinear-coordinate based finite elemental methodology, Comput. Mech., 54(3), 745–762 (2014) [Google Scholar]
- He Xiaocong, Torsional analysis of free vibration of adhesively bonded single-lap joints, Int. J. Adhes. and Adnes., 48, 59–66 (2014) [CrossRef] [Google Scholar]
- S.N. Yakupov, N.M. Yakupov, Thin-Layer Films and Coatings, Mechan. of Solids, 857(1), 012056 (2017) [Google Scholar]
- A.M. Belostotsky, P.A. Akimov, I.N. Afanasyeva, T. B. Kaytukov, Contemporary Problems of Numerical Modelling of Unique Structures and Buildings, Int. J. for Computat. Civil and Struct. Engineer., 13(2), 9 (2018) [Google Scholar]
- Yu.V. Klochkov, A.P. Nikolaev, T.A. Kiseleva, S.S. Marchenko, Comparative analysis of the results of finite element calculations based on an ellipsoidal shell, J. of Machin. Manufact. and Reliab., 45(4), 328–336 (2016) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.